The Ford Barn

Purdy Swoft · 01-31-2019, 12:57 PM

I don't even bother with adjusting finger height . If the fingers are not all at the same level I simply replace the pressure plate with a rebuilt or good used pressure plate . The adjustment height that I have seen advertised for many years is 5/8 . The overall finger height can vary . I have found that the important thing is that all fingers need to be at the same height . The clutch is adjustable .for pedal height

I have been told that the rebuilt pressure plates are better than the foreign made new pressure plates . I have always used rebuilt pressure plates when the pressure plate needed replacement . I've never had a problem with a rebuilt pressure plate .

01-31-2019, 12:57 PM	#10
Purdy Swoft Senior Member Join Date: May 2010 Location: Alabama Posts: 8,099	Re: Pressure Plate I don't even bother with adjusting finger height . If the fingers are not all at the same level I simply replace the pressure plate with a rebuilt or good used pressure plate . The adjustment height that I have seen advertised for many years is 5/8 . The overall finger height can vary . I have found that the important thing is that all fingers need to be at the same height . The clutch is adjustable .for pedal height I have been told that the rebuilt pressure plates are better than the foreign made new pressure plates . I have always used rebuilt pressure plates when the pressure plate needed replacement . I've never had a problem with a rebuilt pressure plate .