Fan Install

[Timstruck]

Originally Posted by Charlie ny

Tim,
Back at you......check out the Off'y Regular Dual but for the 8BA motor
Speedway #560-1075. The 8 BA version of this intake positions the carbs CENTERED
on the motor not biased towards the rear as the earlier version #560-1090 does. The
carbs are close together but again are centered. If you use an alternator there is
ample room for everything. Van Pelt has the alt bracket too. Used this setup many
times.
Google that 8BA Offy intake.
Charlie ny

Charlie, thanks for the input. I like the 1075 intake better due to the centered carbs, but since I have an earlier block with a different breather setup, I didn't think this was an option for me. Also, aren't the carb mounts tilted slightly on this intake to account for later canted engine mount?