Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-19-2018, 12:27 AM   #1
updraught
Senior Member
 
updraught's Avatar
 
Join Date: Feb 2015
Location: Australia
Posts: 2,143
Default Death wobble?

Anyone had a "death wobble" from the shackles not being at 45 degrees?


"This allows the spring shackles to be located at their stock angle of approximately 45 degrees. Mike explains: “I think the shackle angle is very important front or back. When people flatten the springs out by removing leaves or by re-arching or even heating them, the springs become longer. This pushes the bottom of the shackles out so they become almost vertical. This will cause some serious ‘death wobble.'”


https://www.hemmings.com/blog/2013/1...comments-block
updraught is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:10 AM.