The Ford Barn

House of Fab · 07-21-2017, 04:17 PM

Here is a spring perch that will bolt/weld on your banjo quick change rear that rotates the banjo to the rear 5 degrees.

These brackets compensate for the rear axle assembly to rotate towards the rear, allowing the torque tube and driveshaft to align with the transmission, and can be used if your running an open drive shaft.

150.00 which includes shipping to the lower 48

Here is a link to the straight up spring perches for standard banjo rear
https://www.jalopyjournal.com/forum/...rsion.1067209/
Spring perches are available as 2" wide for Model T spring or 2 1/4" for Model A spring

The first pic shows the straight up version on the left and the 5 degree version on right.

07-21-2017, 04:17 PM	#1
House of Fab Senior Member Join Date: Jan 2013 Posts: 119	spring perch mounts for quick change banjo with torque tube or open drive City: Ashland State: VA Price: 150.00 Here is a spring perch that will bolt/weld on your banjo quick change rear that rotates the banjo to the rear 5 degrees. These brackets compensate for the rear axle assembly to rotate towards the rear, allowing the torque tube and driveshaft to align with the transmission, and can be used if your running an open drive shaft. 150.00 which includes shipping to the lower 48 Here is a link to the straight up spring perches for standard banjo rear https://www.jalopyjournal.com/forum/...rsion.1067209/ Spring perches are available as 2" wide for Model T spring or 2 1/4" for Model A spring The first pic shows the straight up version on the left and the 5 degree version on right.