Help w/ Turn Signal Switch

[kd4lok]

Do any of you use the United Pacific turn signal switch, Model 5007R? If so, what flasher unit do you use with it and a hookup schematic would be great if available. Note: This is a 12 volt system.

The Turn Signal Switch looks good, mounts easily and is delivered with a nice schematic. I can control all outside lights properly (combination LEDs in rear and Cowl bulbs in front for Turn Signals) with either a 2-pin or 3-pin flasher but have not found the right flasher/hookup to provide both outside light control and power the two in-car indicator lights on the switch itself.

Thanks for your help and advice.
Bob