|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-21-2017, 01:57 PM | #1 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,343
|
Removing 4 Bad Drums from 4 Good Hubs
I have 4 drums and hubs that I want to send to (fill in the blanK) to have 4 new drums swedged onto with 20 new studs.
To save costs I would like to remove the bad drums before sending. I don't want to just press out the studs and possibly ruin the hubs. Would it be feasible to cut the old studs flush with the drums and then press out the heads? Or should I bite the bullet and have the "experts" do the whole job. Thanks all. Last edited by Ruth; 04-21-2017 at 01:59 PM. Reason: Correct spelling and add a period. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|