Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Hood alignment

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 03-05-2016, 09:51 PM   #3
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Hood alignment
Bent frame most likely, so you could fasten the front and rear of the frame and try jacking up the frame by the rear motor mounts. Use a plate to spread the load so you don't kink the frame rail.
Tom Wesenberg is offline   Reply With Quote
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:40 AM.