Two 81's on a Burns Manifold - Results

[emf]

Thought you guys might like to see this. Got my Burns installed today with two Stromberg 81's. Other than playing with a return spring here and there and cleaning up the linkage, they started right up and I was flying...

It runs fine without a pump, but I was at 1/4 tank and ran out of gas at the carbs. The Walbro pump has a bad diaphragm, so that will need to be replaced. Like I said in another thread, the piping isn't as elegant as I would like, but with the distributor in the way of just about everything, it will have to do. I'm quite pleased, it was really bolt and go...

Frank