Comprehesive howto for brakes?

[nkaminar]

Freak,

Adjust the lengths of the rods first to get the 15 degrees from vertical in front. I forget what is is at the back but the principle is to get the best leverage. If the levers are not near vertical when applying hard braking then you are not getting the best mechanical advantage.

After that, and assuming you have completed all the repairs as needed, try adjusting the brakes starting with the adjusters all the way out. If you cannot get them to adjust then add a pill, but do not change the length of the rods.

If you are a mechanic then you should be able to get the brakes working well enough to lock up the wheels. As in any mechanical system just make sure everything works freely, that no parts are excessively worn, and that the shoes fit to the drums.

And, as blockhead said, use cast iron drums.