The Ford Barn

41woodie · 06-02-2019, 05:42 PM

I need about 5-6 of these special washers. They are used on the two rear passenger door hinges to seat the special clipped head 5/16th" hinge machine screws. I've sourced new hinge machine screws and they are excellent products but the replacement washers are too deep to seat properly in the counter-sunk hinge screw holes. Any of you guys have a few extras you'd part with? I know that they were used on 41 wagons but do not know for sure if they were also used on 42-48 wagons. The OD is 3/4" and the ID is just slightly over 5/16"(hard to measure since it's not a round hole).

IMG_0738-2.jpg

06-02-2019, 05:42 PM	#1
41woodie Member Join Date: Oct 2010 Location: Oklahoma City, Ok. Posts: 31	41-48 Woodie Owners... I need about 5-6 of these special washers. They are used on the two rear passenger door hinges to seat the special clipped head 5/16th" hinge machine screws. I've sourced new hinge machine screws and they are excellent products but the replacement washers are too deep to seat properly in the counter-sunk hinge screw holes. Any of you guys have a few extras you'd part with? I know that they were used on 41 wagons but do not know for sure if they were also used on 42-48 wagons. The OD is 3/4" and the ID is just slightly over 5/16"(hard to measure since it's not a round hole). IMG_0738-2.jpg

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode