Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-07-2013, 08:01 PM   #1
christian
Senior Member
 
christian's Avatar
 
Join Date: Aug 2012
Location: Central NJ
Posts: 239
Default Need help identifying my '31 s/w

I'm about to order an interior for my s/w fordor. Need to know exactly what I have for the interior kit. I know I don't have a 160c, but not sure whether mine is a 160a or 160b. It's a Briggs, has cowl lamps, and has the pull rope along the rear of the front seat body. With this in mind, I was thinking 160b, however a friend told me the 160b has a center arm rest on the rear seat, which I do not have.

Any ideas ???
__________________
1931 Slant Windshield fordor
christian is offline   Reply With Quote
Old 03-07-2013, 08:13 PM   #2
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,604
Default Re: Need help identifying my '31 s/w

when was yours made...the date of the car build and that will help you research what it is..where is the dome light center or rear.....center it is most likey a A and converted to a B the "fancier car" but check your build date and you can find out..
__________________
A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe
msmaron is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-07-2013, 08:31 PM   #3
160B
Senior Member
 
160B's Avatar
 
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,498
Default Re: Need help identifying my '31 s/w

When Ford built the 31 Slant Window he had Murray and Briggs build the bodies the same so parts were interchangeable. There are some telltale differences such as Briggs used d-nuts on the fire wall and Murray used caged nuts on the firewall. Also Brigg had a manufactures mark the Briggs “Bug”, see the attached photo showing the “Bug’ on the RF cowl .on some production parts, on the front cowl.


The 160A. The Ford Standard Fordor had scrolled door and window handles, painted molding around the windows and painted front dash; the dome light was centered in the car with a switch on the light and a rubber mat in the driver's compartment.


The 160B. The Ford town Sedan had a pull rope on the back of the front seat, simple non scrolled door and window handles, wood grained molding (with a scalloped lower frame ) wood grained front dash, the dome light was over the back window and was controlled by a sliding switch on the door post, cowl lights and carpet.


The 160C. The Ford deluxe town Sedan - Same as the 160B but no rear quarter window
__________________
1931 160B & 1931 68B

If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time?

Last edited by 160B; 03-07-2013 at 09:44 PM.
160B is offline   Reply With Quote
Old 03-07-2013, 09:51 PM   #4
christian
Senior Member
 
christian's Avatar
 
Join Date: Aug 2012
Location: Central NJ
Posts: 239
Default Re: Need help identifying my '31 s/w

Quote:
Originally Posted by msmaron View Post
when was yours made...the date of the car build and that will help you research what it is..where is the dome light center or rear.....center it is most likey a A and converted to a B the "fancier car" but check your build date and you can find out..
I have no way of checking the build date as the motor is known to be not original and I just have it registered as a 1931. What I do know is that it is not a late 31 based on the fuel shut off and firewall. Currently the car does not have a "roof" I'm still in the process of putting it together, however there is what appears to be a wooden cut out above the rear window with a cloth wire running the length of the car to it; I'm assuming that would be where the dome light was mounted .
__________________
1931 Slant Windshield fordor
christian is offline   Reply With Quote
Old 03-07-2013, 10:03 PM   #5
Tom Wesenberg
Senior Member
 
Tom Wesenberg's Avatar
 
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
Default Re: Need help identifying my '31 s/w

Sounds like you have a 160B like mine.
Tom Wesenberg is offline   Reply With Quote
Old 03-08-2013, 12:16 AM   #6
msmaron
Senior Member
 
msmaron's Avatar
 
Join Date: May 2010
Location: Wauconda, IL
Posts: 3,604
Default Re: Need help identifying my '31 s/w

Sponsored Links (Register now to hide all advertisements)
Quote:
Originally Posted by christian View Post
however there is what appears to be a wooden cut out above the rear window with a cloth wire running the length of the car to it; I'm assuming that would be where the dome light was mounted .
160B it is!!!
__________________
A7191-Sport Coupe
29 Roadster
29-Town Sedan
29-Original Special Coupe
msmaron is offline   Reply With Quote
Old 03-08-2013, 10:03 AM   #7
christian
Senior Member
 
christian's Avatar
 
Join Date: Aug 2012
Location: Central NJ
Posts: 239
Default Re: Need help identifying my '31 s/w

Excellent, thanks guys, I was pretty sure but just needed that reinforcement.
__________________
1931 Slant Windshield fordor
christian is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 01:54 AM.