The Ford Barn

John Duden · 09-05-2011, 08:39 PM

I have a NOS model K ford pisdon i am looking to get rid of, How much is it worth? I know that this is probably the wrong thread to post it on but they do not have a thread for a MODEL K

it was NOS but had surface rust on it so i cleaned it up
Any help it greatly appreicated

azmodela · 09-05-2011, 10:13 PM

Probably not much. Do you have a Model K? How many people out there have a Model K? How many Model K's out there are missing one piston that is the exact same size as yours? I bet there's only one guy on this board, possibly two that can raise their hand to one of those questions.

Then if you did have one that needed a piston that matched yours, why not have one of the several piston manufacturers make you a set of six Model K pistons (Egge, Black, etc.)?

I don't mean to burst any bubbles, but there's only a real value to the guy/girl that has a Model K that needs a piston in the size you have.

Roadster62 · 09-05-2011, 10:30 PM

You would do best on eBay just listing it by dimentions in the early gas engine section. Someone with a one lunger hit and miss engine may need it.

Tom Wesenberg · 09-06-2011, 03:54 AM

Since Timothy Kelly has a Model K maybe he would be interested in it as a prop along side his car.

Manuel · 09-07-2011, 02:01 AM

Try the Model T Club forums.
Every now and then they have a post on Model K's.

Manuel in Oz

Tom Wesenberg · 09-07-2011, 12:10 PM

Sponsored Links (Register now to hide all advertisements)

Bring it to our next clinic, the first of the new season. It will make an interesting show & tell item.

John Duden · 09-07-2011, 03:18 PM

tom
i will try to do that, will have to see if i can get up
John

John Duden · 10-16-2011, 04:17 PM

Tom Wesesberg,
When are the twin cities club meetings?
John

Tom Wesenberg · 10-17-2011, 05:39 AM

Quote:

Originally Posted by John Duden

Tom Wesesberg,
When are the twin cities club meetings?
John

This Thursday at 7:00 PM at the Brooklyn Center high school cafeteria.

John Duden · 10-17-2011, 07:05 AM

Darn, i will be in nashville Tennessee
john

09-05-2011, 08:39 PM	#1
John Duden Senior Member Join Date: Jun 2010 Posts: 1,856	model k ford piston I have a NOS model K ford pisdon i am looking to get rid of, How much is it worth? I know that this is probably the wrong thread to post it on but they do not have a thread for a MODEL K it was NOS but had surface rust on it so i cleaned it up Any help it greatly appreicated

09-05-2011, 10:13 PM	#2
azmodela BANNED Join Date: May 2010 Posts: 352	Re: model k ford piston Probably not much. Do you have a Model K? How many people out there have a Model K? How many Model K's out there are missing one piston that is the exact same size as yours? I bet there's only one guy on this board, possibly two that can raise their hand to one of those questions. Then if you did have one that needed a piston that matched yours, why not have one of the several piston manufacturers make you a set of six Model K pistons (Egge, Black, etc.)? I don't mean to burst any bubbles, but there's only a real value to the guy/girl that has a Model K that needs a piston in the size you have.

09-05-2011, 10:30 PM	#3
Roadster62 Senior Member Join Date: May 2010 Location: Ridgefield, Ct Posts: 3,449	Re: model k ford piston You would do best on eBay just listing it by dimentions in the early gas engine section. Someone with a one lunger hit and miss engine may need it. __________________ They don't have to run to be enjoyed. I'm here to enjoy the hobby, and enjoy the cars no matter what they look like. Most of the worlds problems are electrical.

09-06-2011, 03:54 AM	#4
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: model k ford piston Since Timothy Kelly has a Model K maybe he would be interested in it as a prop along side his car.

09-07-2011, 02:01 AM	#5
Manuel Senior Member Join Date: May 2010 Location: ACT Australia Posts: 536	Re: model k ford piston Try the Model T Club forums. Every now and then they have a post on Model K's. Manuel in Oz

09-07-2011, 12:10 PM	#6
Tom Wesenberg Senior Member Join Date: May 2010 Location: Mpls, MN Posts: 27,582	Re: model k ford piston Sponsored Links (Register now to hide all advertisements) Bring it to our next clinic, the first of the new season. It will make an interesting show & tell item.

09-07-2011, 03:18 PM	#7
John Duden Senior Member Join Date: Jun 2010 Posts: 1,856	Re: model k ford piston tom i will try to do that, will have to see if i can get up John

10-16-2011, 04:17 PM	#8
John Duden Senior Member Join Date: Jun 2010 Posts: 1,856	Re: model k ford piston Tom Wesesberg, When are the twin cities club meetings? John

10-17-2011, 07:05 AM	#10
John Duden Senior Member Join Date: Jun 2010 Posts: 1,856	Re: model k ford piston Darn, i will be in nashville Tennessee john