unknown Ford intake manifold

[wizzer47]

IMG_8239.JPG

IMG_8240.JPG

IMG_8241.JPG

IMG_8242.JPG

IMG_8243.JPG

IMG_8244.JPG

IMG_8245.JPG

Hello, I am posting this for a friend.
He has a "old" Ford intake manifold that I have never see before.
Ford is on the manifold and the only numbers I found on it are,
RFFE2JE9K4618A,
I have included some pics of the manifold.
Any information is welcomed, thanks for you time.

[51504bat]

Appears to be for a small block Ford. Post over on the '54 and up section and/or the HAMB

[Zeke3]

It looks to me to be off a small block Ford V8 from the 1980-1990s timeframe that had direct fuel injection into the intake ports. Definitely not from the Flathead era.

[petehoovie]

Originally Posted by wizzer47

[ATTACH]583527
Hello, I am posting this for a friend.
He has a "old" Ford intake manifold that I have never see before.
Ford is on the manifold and the only numbers I found on it are,
RFFE2JE9K4618A,
I have included some pics of the manifold.
Any information is welcomed, thanks for you time.

[Bob C]

Looks like a lower intake to match this upper intake from a 98-01 explorer 5.0.

[petehoovie]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by Bob C

Looks like a lower intake to match this upper intake from a 98-01 explorer 5.0.

[flatrod]

It looks cast iron, I have never seen a cast iron one. Anyway, it is off a 351 Windsor lower haft of a EFI intake. Probably truck.

[wizzer47]

Hello, I would like to thank everyone that took the time to reply to my post.

Much appreciated!

I will relay this information to my Friend.

Thanks again, Wizzer47