|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Apr 2025
Location: Behind the redwood ccurtain NorCal
Posts: 32
|
![]()
I have a '46 Super Deluxe convertible with those mirrors mounted on the side of the cowl replacing a piece of side chrome molding. It's impossible to see anything out of them.
There are also a pair of short shanked mirrors mounted on the doors which do work. Quite a strange look with two mirrors per side. Does anyone out there have the 4 1/2 +/- inch pieces so I can remove the swan neck mirrors. Or are reproduction pieces available. tony |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,566
|
![]()
46 trim is not reproduced You will depend on good used trim.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Member
Join Date: Apr 2025
Location: Behind the redwood ccurtain NorCal
Posts: 32
|
![]()
Thank you. I thought that may be the case.
tony |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Sep 2016
Location: Melbourne Australia
Posts: 620
|
![]()
I had the same problem on my 41. I went with door mounted mirrors after removing the cowl mounted mirrors. I found a seller on eBay that was able to fabricate the cowl trims for the 41.
Unfortunately it was a few years back, otherwise I'd share the details. |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,566
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|