|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: May 2023
Location: Opelika, AL
Posts: 43
|
![]()
I've got two stripped blocks I want to store on a shelf but was concerned about weight. Search here and google turned up all kinds of weights for various combinations of block/head/crank/etc and lots of "about, I think, around, probably, etc," but I never could find anything definitive for just a bare block. So I weighed both today with a digital crane scale and got:
- block w/ just intake/exhaust studs = 95lbs - block w/ just head studs = 96lbs I was a little surprised how light they actually were. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,167
|
![]()
Block empty of all parts.
__________________
www.whidbeymodelaclub.com Last edited by Gary WA; 12-30-2023 at 02:34 PM. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: VA
Posts: 1,443
|
![]()
Thanks, it is good to get an actual weight, rather than a good guess.
|
![]() |
![]() |
![]() |
#4 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,560
|
![]() Quote:
![]() ![]() ![]() |
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Apr 2013
Posts: 293
|
![]()
When I was 16 years old, I maybe weighed 135 pounds., I tossed 70-pound hay bales all day long, stayed out until the wee hours, got up early and went right back to tossing bales. Now 77 and have to have 40-pound water softener bags delivered to the basement. They feel like they weigh 100 pounds. Old age comes with challenges.
|
![]() |
![]() |
![]() |
#6 | |
Senior Member
Join Date: Jul 2010
Location: Cow Hampshire
Posts: 4,188
|
![]() Sponsored Links (Register now to hide all advertisements)
Quote:
Time enough for that later. Joe K
__________________
Shudda kept the horse. |
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,564
|
![]()
When we (my wife and I) had a rural general store, I would often have to deliver bags of cement. 25 to the tonne meant they weighed 40 kg each (88 lbs). I used to carry one under each arm without raising a sweat. I break out in beads of it these days just looking at a bag. Dunno how I did it!
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jul 2023
Posts: 235
|
![]()
What is the capacity of the crane scale? Could it be for normally weighing much heavier loads and not reading accurately on the low end? 95 pounds seems a bit on the light side, just bought a cylinder head which had a shipping weight of 40 pounds packaged in a cardboard box.....
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Jun 2010
Location: 34.22 N 118.36 W
Posts: 1,068
|
![]()
The best saying heard about building race motors out of a Model A
“Is like trying to build a safe out of a tissue box” 95# is about right, equal to a good crank and girdle assembly J
__________________
As Carroll Smith wrote; All Failures are Human in Origin. |
![]() |
![]() |
![]() |
#10 | |
Member
Join Date: May 2023
Location: Opelika, AL
Posts: 43
|
![]() Quote:
As far as wrestling them around, every shop needs a hoist or three. |
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Jul 2023
Posts: 235
|
![]()
For sure with the casting variations, maybe it truly does only weigh that little, but it surprises me. Usually scales like gauges are more accurate at mid range in this case 500#. I would not expect that a 1000# gauge would accurately read 95# (9.5% of scale)....
Interesting and thought provoking none the less...... |
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: May 2010
Posts: 2,799
|
![]()
Makes me think of watching that guy at the Rouge, original Ford film, standing there pulling all that cast iron off the line sliding it to another line.... He was one hard working dude! It was coming at him as fast as he could work.
I couldn't work like that even as a youngster ![]() |
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Jan 2012
Location: Western North Carolina
Posts: 4,075
|
![]()
I am 79. I can lift the blocks and carry them outside to paint them. When in my 20's I would lift a complete engine out of the car to exchange it with a better one. I recently did some concrete work with 80 pound sacks of pre mixed concrete. They got lighter by the end of the job. What I learned is that even an old person can build up muscles through exercise.
__________________
A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past. |
![]() |
![]() |
![]() |
#14 | |
Member
Join Date: May 2023
Location: Opelika, AL
Posts: 43
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|