![]() |
#1 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,859
|
![]()
Does anyone know if it is possible to fit a 37-39 gas tank into a 35 [with the body attached?
__________________
Unfortunately, two half wits don't make a whole wit! |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Napa,California
Posts: 6,097
|
![]()
It will probably fit, but the angle of the fill neck will be a problem.
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,847
|
![]()
I put a used (price was right) aftermarket '37-'39 tank in my '35. It has a clamp on instead of the original screw in style filler. I used an aftermarket '35-'36 filler tube and had to alter it to suit the angle of the stub on the tank.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,859
|
![]() Sponsored Links (Register now to hide all advertisements)
__________________
Unfortunately, two half wits don't make a whole wit! |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|