![]() |
#1 |
Senior Member
Join Date: Apr 2019
Location: Mt. Pleasant, SC
Posts: 632
|
![]()
Question for those who have one of these - does the thermometer work well enough to be useful ? Can you see it while driving ??
Thanks - JIm |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Aug 2011
Location: Eagle Bend, MN
Posts: 2,081
|
![]()
I have one. Seals to radiator well which is a must. Its not easy to see the thermometer, my car runs quite cool though. Looks great flying out there in front of you. Some have complained about the quality, mine seems very well made. Got it from Mac's maybe 8 or more years ago.
__________________
"There are some that can destroy an anvil with a teaspoon and shouldn't be allowed to touch anything resembling a tool." |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Sep 2019
Location: Fort Gratiot, Michigan
Posts: 2,296
|
![]()
Mine is an original that was rebuilt. It is in my opinion primarily an ornament which is functional to a point. Is it accurate, I am sure not. It is an indication at best!
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,194
|
![]()
Jim,
I have this quail too. The bird looks good. The thermometer is hardly recognizable even in broad daylight. It indicates boiling over just before it happens. (As a precaution, I installed a remote thermometer inside.)
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Nov 2011
Location: Arkansas & Alaska
Posts: 685
|
![]()
I have had one on my roadster pickup for close to 10 years and like it real well. When I climb some steep mountains here in the Ozarks it tells me when I need to ease up a little. I have always been able to see the red fluid when it starts to rise up in the glass and can tell its getting close to getting hot. Wish I had one on my tudor also.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jun 2011
Location: Westchester County, NY
Posts: 632
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 8,041
|
![]()
I have one on my Tudor and think it is about as useful as flyscreens on a submarine. I used to have a motor meter on my Phaeton and to get any reading out of it, I cut a piece of copper tube so it just fit over the bottom of the thermometer,. it pointed down with a bend at the bottom pointed towards the radiator inlet so it kind of scooped in the hot water coming from the engine. There was a hole just under the thermometer to let the water out again. The idea was to have water from the engine constantly circulating past the sensitive pert of it so I could get a reading on the water, not on the air above the water. It worked very well but I can't do it to the quail because I wouldn't be able to open the cap. Apart from the looks of the thing, it is useless. I'm sorry I bought a quail with the thermometer.
__________________
I sometimes wonder what happened to the people who asked me for directions. Even at my age, I still like to look at a young, attractive woman but I can't really remember why. |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jan 2016
Posts: 2,459
|
![]()
The problem with these "hood ornaments" is that the temperature stem is never in the water, it is always above.
This means you never get an accurate reading with just steam vapor. |
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 4,112
|
![]()
A vintage trick was to attach a piece of linked-chain to the bottom of the thermometer stem so that the chain would dangle in the coolant below the top baffle in the radiator. The chains I have seen appear to be brass sash cord.
__________________
Bob Bidonde Last edited by Bob Bidonde; 04-14-2020 at 08:38 AM. |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: May 2010
Location: on the Littlefield
Posts: 6,553
|
![]()
the motormeter type temperature gauge is not intended to be sensing the coolant, the intention is to sense the air over the coolant--and to react to the first beginnings of steam before full boil is reached----
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
In my opinion the thermo Quail is mostly a decoration . An inside temperature gauge is my choice because it is easier to read .
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: Dec 2010
Location: Kritter Krick, Flaw-duh
Posts: 1,171
|
![]()
Did Ford offer thermo-quails as an authorized accessory? I thought the originals were non-thermo and thermos are a reproduction adaptation.
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
I agree that the non thermo quail was the real authorized accessory . The thermos quail is an aftermarket accessory .
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Oct 2019
Location: Washington
Posts: 176
|
![]() |
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 8,099
|
![]()
The baffle in the upper tank of the radiator is mostly in the way .
|
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 8,041
|
![]()
What Purdy says and if the probe was long enough to reach the water, you wouldn't be able to open the cap. It would hit the side of the neck well before the quail was swung back far enough to even see in there.
__________________
I sometimes wonder what happened to the people who asked me for directions. Even at my age, I still like to look at a young, attractive woman but I can't really remember why. |
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: May 2010
Location: Fountain Valley, Calif.
Posts: 937
|
![]()
I have had one for 14 years now, and it works for me. It’s true it does not give you a temperature, but I can tell by how far it has risen how close I am to overheating. My car does not hardly ever get hot....mostly while hill climbing in the summer. I like the looks of it and I have reasonable expectations.....
|
![]() |
![]() |
![]() |
#18 |
Senior Member
Join Date: Jan 2019
Location: Germany, near Aachen
Posts: 1,194
|
![]()
Hallo und guten Abend.
I have a note about the quail thermometer insert. After about a year of sunshine, the original red display line has faded more and more and is now barely visible. Obviously, the coloring of the liquid advertising line is not lightfast. Too bad, the display works, but it is not recognizable.
__________________
Beste Gruesse aus Deutschland, Werner Ford Model A, Roadster, 1928 Citroen 11 CV, 1947 Hercules W 2000, 1976; (with NSU-Wankel Rotary Engine), Canadian version |
![]() |
![]() |
![]() |
#19 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 2,091
|
![]() Quote:
I wondered why these were offered for sale. It makes more sense now. Apparently, they “wear out” from a color perspective. https://www.brattons.com/quail-therm...epair-kit.html Sent from my iPhone using Tapatalk |
|
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Mar 2012
Location: Ohio
Posts: 2,476
|
![]()
I agree with what McMimmcs said above. I had a moto-meter lolypop I got years ago from Snyders. I could see mine well. Bought the o-ring from Brattons and that sealed it nicely.
I HAD TO REMOVE IT. Somone tried to steal it one day when I went to the hardware store, and broke the neck off of my $585 radiator! |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|