![]() |
#1 |
Senior Member
Join Date: May 2018
Location: Tallahassee
Posts: 375
|
![]()
I am trying to tighten the body bolts on my 34 cabriolet. I have found only 3bolts for each side. 1 on the floorboard, 1 under the seat and one in the rumble seat. Is there another one?
The bolt on the drivers side has stripped threads. Anyone know where I can get a replacement nut and bolt. How tight should I tighten these bolts? Richard |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2015
Posts: 10,159
|
![]()
I wish I could tell you to contact Roy Nacewicz....
![]() Last edited by petehoovie; 04-19-2019 at 02:25 PM. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,601
|
![]()
Six per side vertically, three per side horizontally, and twelve to the center X member; with Roy's passing, I know of no one else who offers the correct fasteners for your purposes. I share Pete's wish.
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: so cal, placerville, vegas
Posts: 1,414
|
![]()
When I put my 34 sedan body down, All of the bolts that David mentions, were used. But, my sedan bolt count was in the '50-range'. So, I wonder, is a Cabriolet different, meaning less bolts? Anyway, at least, all of the bolts that David mentions, were used.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2018
Location: Tallahassee
Posts: 375
|
![]() Sponsored Links (Register now to hide all advertisements)
Richard |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|