The Ford Barn

jhowes · 12-18-2018, 09:47 AM

Can anyone give me a name of someone that will rebuild a Model A horn?? Jack

burner31 · 12-18-2018, 10:12 AM

Jack

DD931 · 12-18-2018, 10:38 AM

There are good instructions in Les Andrew's book (Vol.1).

30 Closed Cab PU · 12-18-2018, 10:46 AM

The Web Site list at the top when you go into this forum has some Horn listings.

BRENT in 10-uh-C · 12-18-2018, 03:34 PM

The Horn Shoppe in Oriskany, NY is a good one. Bill Randall is the proprietor.

Keith True · 12-18-2018, 03:46 PM

Sponsored Links (Register now to hide all advertisements)

I had two done by Bill because he could rewind the fields.A couple others said I had to have a good armature and fields for them to do them.For some reason I'm thinking he is on Oriskany road in Rome N.Y.It's been a few years,but his address is on a box from him that I haven't opened yet.It's been on the shelf for about 10 years.

Dale G. · 12-18-2018, 07:03 PM

Bill wasn't at Hershey this year so I called him. He is not doing Model A horns anymore. Too much arthritis in his hands.

kbinde2 · 12-18-2018, 07:35 PM

Jim Diehl in Michigan did mine, Nice work, and a good person to work with.

NCRebel · 12-19-2018, 01:28 PM

Is it a Sparton horn? There are excellent rebuild videos on youtube. If you need to rewind the copper I would get a professional unless you have great skills I don't possess.

12-18-2018, 09:47 AM	#1
jhowes Senior Member Join Date: Jul 2010 Location: upstate NY near Mass border Posts: 789	Horn Rebuild Can anyone give me a name of someone that will rebuild a Model A horn?? Jack

12-18-2018, 10:12 AM	#2
burner31 Senior Member Join Date: Dec 2014 Location: Shawnee, Ok Posts: 3,479	Re: Horn Rebuild Jack __________________ Keith Shawnee OK '31 SW 160-B

12-18-2018, 10:38 AM	#3
DD931 Senior Member Join Date: May 2010 Location: PA Poconos Posts: 723	Re: Horn Rebuild There are good instructions in Les Andrew's book (Vol.1).

12-18-2018, 10:46 AM	#4
30 Closed Cab PU Senior Member Join Date: Aug 2018 Posts: 2,332	Re: Horn Rebuild The Web Site list at the top when you go into this forum has some Horn listings.

12-18-2018, 03:34 PM	#5
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,971	Re: Horn Rebuild The Horn Shoppe in Oriskany, NY is a good one. Bill Randall is the proprietor. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

12-18-2018, 03:46 PM	#6
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 3,421	Re: Horn Rebuild Sponsored Links (Register now to hide all advertisements) I had two done by Bill because he could rewind the fields.A couple others said I had to have a good armature and fields for them to do them.For some reason I'm thinking he is on Oriskany road in Rome N.Y.It's been a few years,but his address is on a box from him that I haven't opened yet.It's been on the shelf for about 10 years.

12-18-2018, 07:03 PM	#7
Dale G. Senior Member Join Date: May 2010 Location: Jacksonville, FL Posts: 292	Re: Horn Rebuild Bill wasn't at Hershey this year so I called him. He is not doing Model A horns anymore. Too much arthritis in his hands.

12-18-2018, 07:35 PM	#8
kbinde2 Senior Member Join Date: Oct 2015 Location: Delaware Posts: 270	Re: Horn Rebuild Jim Diehl in Michigan did mine, Nice work, and a good person to work with.

12-19-2018, 01:28 PM	#9
NCRebel Senior Member Join Date: Sep 2017 Location: Oxford, MS Posts: 102	Re: Horn Rebuild Is it a Sparton horn? There are excellent rebuild videos on youtube. If you need to rewind the copper I would get a professional unless you have great skills I don't possess.