The Ford Barn

Cider Mill · 02-23-2011, 12:41 PM

Does anyone know the correct finish for a 30 Town Car door pull that is attached to the windowframe? Also the correct finish for the inside and outside door openers and window crank handles?

msmaron · 02-23-2011, 12:42 PM

Look in your Judging standards they are right there

Bob Johnson · 02-23-2011, 01:30 PM

Town Car or Town Sedan, there is a BIG difference?

Bob

BRENT in 10-uh-C · 02-23-2011, 03:58 PM

If it is indeed a Town Car, ....scan the picture below.

.

Cider Mill · 02-24-2011, 10:47 AM

I guess I need some education regarding that question. What is the difference? Mine is a fordor with a roof all the way to the windshield. Is the car shown in Bob Johnson's avatar above a Town Car? If yes, then I have a Town Sedan. I'm still learning everyday from you guys - Thanks!

Gary WA · 02-24-2011, 10:51 AM

Sponsored Links (Register now to hide all advertisements)

Yes, Town Cars are rare. 18 left in the world out of approx 1098 built. Now you wish you had one!!!! Enjoy

Cider Mill · 02-24-2011, 10:55 AM

OK, now that I have that figured out (It's a Town Sedan) what finish are the door pulls?

Bob Johnson · 02-24-2011, 11:20 AM

Nickel plated, Butler finish

Cider Mill · 02-24-2011, 07:12 PM

Thanks Bob!

Cider Mill · 02-25-2011, 08:54 AM

Is there anything else that should be the nickel plated, butler finish besides the window crank handles, & door openers?
How about the windshield wiper on/off knob?
Emergency brake handle/lever?
gear shift shaft?
oval dome light bezel?
anything else before I send these out for plating?
Anyone know any good nickel, butler finish platers in the northeast?

Cider Mill · 03-03-2011, 01:24 PM

Btt

02-23-2011, 12:41 PM	#1
Cider Mill Senior Member Join Date: Oct 2010 Location: Shelton, CT Posts: 339	Town Car door pulls Does anyone know the correct finish for a 30 Town Car door pull that is attached to the windowframe? Also the correct finish for the inside and outside door openers and window crank handles?

02-23-2011, 12:42 PM	#2
msmaron Senior Member Join Date: May 2010 Location: Wauconda, IL Posts: 3,604	Re: Town Car door pulls Look in your Judging standards they are right there __________________ A7191-Sport Coupe 29 Roadster 29-Town Sedan 29-Original Special Coupe

02-23-2011, 01:30 PM	#3
Bob Johnson Senior Member Join Date: May 2010 Location: California Posts: 1,013	Re: Town Car door pulls Town Car or Town Sedan, there is a BIG difference? Bob

02-24-2011, 10:47 AM	#5
Cider Mill Senior Member Join Date: Oct 2010 Location: Shelton, CT Posts: 339	Re: Town Car door pulls I guess I need some education regarding that question. What is the difference? Mine is a fordor with a roof all the way to the windshield. Is the car shown in Bob Johnson's avatar above a Town Car? If yes, then I have a Town Sedan. I'm still learning everyday from you guys - Thanks!

02-24-2011, 10:51 AM	#6
Gary WA Senior Member Join Date: May 2010 Location: Clinton,WA/Whidbey Island Posts: 4,457	Re: Town Car door pulls Sponsored Links (Register now to hide all advertisements) Yes, Town Cars are rare. 18 left in the world out of approx 1098 built. Now you wish you had one!!!! Enjoy __________________ www.whidbeymodelaclub.com

02-24-2011, 10:55 AM	#7
Cider Mill Senior Member Join Date: Oct 2010 Location: Shelton, CT Posts: 339	Re: Town Car door pulls OK, now that I have that figured out (It's a Town Sedan) what finish are the door pulls?

02-24-2011, 11:20 AM	#8
Bob Johnson Senior Member Join Date: May 2010 Location: California Posts: 1,013	Re: Town Car door pulls Nickel plated, Butler finish

02-24-2011, 07:12 PM	#9
Cider Mill Senior Member Join Date: Oct 2010 Location: Shelton, CT Posts: 339	Re: Town Car door pulls Thanks Bob!

02-25-2011, 08:54 AM	#10
Cider Mill Senior Member Join Date: Oct 2010 Location: Shelton, CT Posts: 339	Re: Town Car door pulls Is there anything else that should be the nickel plated, butler finish besides the window crank handles, & door openers? How about the windshield wiper on/off knob? Emergency brake handle/lever? gear shift shaft? oval dome light bezel? anything else before I send these out for plating? Anyone know any good nickel, butler finish platers in the northeast? Last edited by Cider Mill; 02-25-2011 at 09:12 AM. Reason: additional info

03-03-2011, 01:24 PM	#11
Cider Mill Senior Member Join Date: Oct 2010 Location: Shelton, CT Posts: 339	Re: Town Car door pulls Btt