The Ford Barn

Neil Wilson · 11-16-2017, 10:07 AM

Has anyone made up a torque table for the Model A?

woodiewagon46 · 11-16-2017, 10:09 AM

There is a list of torque specifications in the Brattons catalog.

jwilliams81 · 11-16-2017, 10:23 AM

What he said..

https://www.brattons.com/specifications.html

Neil Wilson · 11-18-2017, 05:49 PM

Thanks for the reference - great.

Railcarmover · 11-18-2017, 07:28 PM

Sponsored Links (Register now to hide all advertisements)

Tap and clean all grey iron tapped holes before torquing.Test torque before assembly, rig a pulling stud and spread the load with a wide hard washer before installing the finish part...thats crucial with head studs..this way you can check and repair a stud bore without wasting a gasket.

11-16-2017, 10:07 AM	#1
Neil Wilson Senior Member Join Date: May 2010 Location: Boulder, CO Posts: 561	Torque Table for Model A? Has anyone made up a torque table for the Model A? __________________ [email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com

11-16-2017, 10:09 AM	#2
woodiewagon46 BANNED Join Date: Jun 2012 Location: Long Island,NY Posts: 1,568	Re: Torque Table for Model A? There is a list of torque specifications in the Brattons catalog.

11-16-2017, 10:23 AM	#3
jwilliams81 Senior Member Join Date: Sep 2016 Location: Cincinnati OH Posts: 422	Re: Torque Table for Model A? What he said.. https://www.brattons.com/specifications.html __________________ 1931 Murray Town Sedan. Black body with Apple Green pin stripe. 1923 Model T Touring with electric start. Low radiator Cincinnati, Ohio

11-18-2017, 05:49 PM	#4
Neil Wilson Senior Member Join Date: May 2010 Location: Boulder, CO Posts: 561	Re: Torque Table for Model A? Thanks for the reference - great. __________________ [email protected] - email contact https://aafords.com Ford Model AA Truck Club @ aafords.com

11-18-2017, 07:28 PM	#5
Railcarmover BANNED Join Date: Apr 2017 Location: Sacramento Posts: 1,262	Re: Torque Table for Model A? Sponsored Links (Register now to hide all advertisements) Tap and clean all grey iron tapped holes before torquing.Test torque before assembly, rig a pulling stud and spread the load with a wide hard washer before installing the finish part...thats crucial with head studs..this way you can check and repair a stud bore without wasting a gasket.