Mystery Water Pump?

[pklarkin]

Hi folks,

I'm in the process of a frame-up restoration of a 1929 couple and I started on the water pump today. To my surprise, I found a housing I'm not familiar with that looks thinner and doesn't have the hole in the side of housing like a normal pump. Any insight on what this pump is, and whether it's worth rebuilding? Thanks in advance for your help.

Pat

[BRENT in 10-uh-C]

Originally Posted by pklarkin

Hi folks,

I'm in the process of a frame-up restoration of a 1929 couple and I started on the water pump today. To my surprise, I found a housing I'm not familiar with that looks thinner and doesn't have the hole in the side of housing like a normal pump. Any insight on what this pump is, and whether it's worth rebuilding? Thanks in advance for your help.

Pat

That is/was an era aftermarket leakless water pump. I have used a couple on my own personal vehicles where I did not care about authenticity. They work good.

[BRENT in 10-uh-C]

Originally Posted by BRENT in 10-uh-C

That is/was an era aftermarket leakless water pump. I have used a couple on my own personal vehicles where I did not care about authenticity. They work good.

Pics of it on one of my cars;..

.

[pklarkin]

Thanks Brent! Looks like the same one. I appreciate your help.

[Binger]

I have one like that on my roadster too. I haven't had any issues with it for more than 20 years.

[Keith True]

Sponsored Links (Register now to hide all advertisements)

I like those.When I see them for sale I grab them.I have a couple I am using and a few extras.

[verdirick]

I've had one on my Coupe for 30 years. No problem. Have a couple that leak and would like to find someone who can rebuild them? Where can I find new seals? One definitely needs a new shaft,,,,,,,

[larrys40]

Those were produced by a gentlemen in Kentucky back in the 70-80's. I can't recall his name anymore but they were excellent pumps. I may still have one around somewhere

Larry Shepard

[Afordman31]

Brent, you don't need a fan on your speedster?

[larrys40]

I just remembered his name . Bill powers. He passed away many years ago.
Larry

[BILL WILLIAMSON]

Is that a spring loaded seal, inside the impeller?
Bill ????

[Jerry in Shasta]

You can get a new seal at a swiming pool pump repair shop, as I remember it is seal #1. Be sure to polish the seal area on the pump frame.

jb