|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
07-18-2010, 05:00 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 103
|
Wanted: 1933-34 Ford car or 1/2 ton truck frame
City:
Fresno
State:
Ca.
I just need the bare frame. I may consider a roller with original front and rear axle. Thanks!.................. [email protected]
|
07-23-2010, 12:23 PM | #2 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
btt.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-02-2010, 07:17 PM | #3 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
btt.
|
08-09-2010, 12:52 PM | #4 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
still looking
|
08-16-2010, 03:35 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
back to the top.
|
08-21-2010, 10:22 AM | #6 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
Sponsored Links (Register now to hide all advertisements)
|
08-23-2010, 03:43 PM | #7 |
Senior Member
Join Date: May 2010
Posts: 2,045
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
I have a '34 frame (actually, a rolling chassis.) However, I would be able to use the front and rear-ends myself and the engine. (It's a '37) The chassis was used as a crop duster in Central Calif. There are pieces welded to the frame, 1/2" plates. There is some rust in the rear kick-ups. X-member is nice. Front and rear cross members are there. It looks fairly straight other than the welded-on metal. If I took everything off, I'd want $700 for the bare frame. I'm located in Buellton, CA. Let me know if I can help.
Lloyd |
09-02-2010, 10:11 AM | #8 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
I tried to buy one, but got shot down, so I'm still looking. Thanks.
|
09-04-2010, 10:42 PM | #9 |
Senior Member
Join Date: May 2010
Location: Central CA
Posts: 339
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
I still have a pair of rails minus front 2'+/- $50.
|
09-07-2010, 11:44 AM | #10 |
Senior Member
Join Date: May 2010
Location: Crystal Lake, IL
Posts: 175
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
If you have iterest in a '39 1/2 Ton frame and all, let me know. 815-479-0210
__________________
John Mc Crystal Lake, IL '39 1/2 Ton Pickup '56 Lincoln Capri Hardtop '77 Lincoln Town Coupe |
09-13-2010, 07:01 PM | #11 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
btt.
|
09-19-2010, 09:37 AM | #12 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
btt.
|
09-29-2010, 05:32 PM | #13 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
btt.
|
10-09-2010, 11:12 AM | #14 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
btt.
|
10-28-2010, 12:40 PM | #15 |
Junior Member
Join Date: Oct 2010
Location: Greenfield MN
Posts: 6
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
Well,
If you want to come up to MN I have a 34 pickup frame with a stock front axle split arms front cross member is still all there and juice brakes it has a 57 chevy rear using the stock 34 rear spring. The x brace was cut some for brake pedals? The PO removed the center (the mount for the wishbone) of the X frame to put a SBC and hacked it up where the steering box mounts to put a late model steering box in it. I have some frame sections that could be used to repair it. It is a roller. All that for only $800.00.... |
11-17-2010, 05:51 PM | #16 | |
Junior Member
Join Date: Nov 2010
Posts: 1
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
If you still have this available, please call Dick at 319-987-2610.
Thanks. Quote:
|
|
11-19-2010, 10:18 AM | #17 |
Senior Member
Join Date: May 2010
Posts: 103
|
Re: Wanted: 1933-34 Ford car or 1/2 ton truck frame
I sold the cab, bed and all the sheet metal. The frame is NO LONGER NEEDED Thanks!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|