|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
06-22-2011, 09:23 AM | #1 |
Senior Member
Join Date: May 2010
Location: State College, PA
Posts: 362
|
Truck oil pan gasket - one inside & one outside?
I'm using a truck oil pan and it has the large plate with a ring inside the pan. Only one gasket in my 'Best' gasket set. Should it go inside the pan under the ring or outside under the plate? Or . . . should I make another and have one inside and one out? Looks like a good place to have a leak.
|
06-22-2011, 11:34 AM | #2 |
Senior Member
Join Date: May 2010
Location: Regina Canada
Posts: 1,335
|
Re: Truck oil pan gasket - one inside & one outside?
should be two gaskets.
|
Sponsored Links (Register now to hide all advertisements) |
|
06-22-2011, 05:04 PM | #3 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: Truck oil pan gasket - one inside & one outside?
Ford provided an answer...unfortunately in this case they actually provided TWO answers: http://www.vanpeltsales.com/FH_web/F...48-51truck.jpg
and http://www.vanpeltsales.com/FH_web/F...g_1949to53.jpg Looking again, I think the two-gasket drawing is of the rare HD Taxi/Police pan with cleanout and not a truck pan, but the issues look identical! Take your pick and go for it! |
06-22-2011, 08:02 PM | #4 |
Senior Member
Join Date: May 2010
Location: State College, PA
Posts: 362
|
Re: Truck oil pan gasket - one inside & one outside?
Thanks Bruce,
I should have looked at Van Pelts site before asking the question. I think I'll go with double gaskets. |
06-23-2011, 08:28 PM | #5 | |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,258
|
Re: Truck oil pan gasket - one inside & one outside?
Quote:
This is interesting for I have three F-1 pans. One came off a motor I personally pulled out of an F-1 so I'm pretty sure it is the correct one. All three had the two gasket deal. Now, with all things Ford and folklore, no one will ever now for certain if they left Dearborn that way or not. I think Best Gasket Co. still includes these two gaskets in their 8BA pan gasket kit/set. |
|
06-23-2011, 05:11 PM | #6 |
Senior Member
Join Date: May 2010
Location: Las Vegas, NV
Posts: 213
|
Re: Truck oil pan gasket - one inside & one outside?
Sponsored Links (Register now to hide all advertisements)
|
06-24-2011, 06:36 AM | #7 |
Senior Member
Join Date: May 2010
Location: Tucson Arizona
Posts: 301
|
Re: Truck oil pan gasket - one inside & one outside?
Silicone's for bathrooms. I only use Permatex Right Stuff as a sealer.
__________________
Building a 29 Sedan on 32 chassis........ very slowly.... |
10-24-2020, 09:02 PM | #8 |
Senior Member
Join Date: Dec 2018
Location: Southbury Ct
Posts: 147
|
Re: Truck oil pan gasket - one inside & one outside?
I have a 49-53 Mercury Flathead in mine. I got the oil pan with the big round clean-out. When I first got the car 2 years ago I changed out the gasket but I only did the outside one, big mistake, leaks like a sieve! I am going to do it again and want to do both gaskets this time. Can that inner gasket be done correctly while pan is still on the car? I think remember an inner flange.
One huge problem I had was that the bolts had no way to hold the heads from spinning because they are inside the pan. i ended up getting studs with Allen key holes in the end. I put a nyloc on the other end that is in the oil pan. I remember not being very happy about the whole situation and definitely not happy about how it came out. I am going to re-do it soon. Anybody have any good advice? Are these bolts normal to be like that? Thanks...Dave |
10-25-2020, 08:31 PM | #9 | |
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,559
|
Re: Truck oil pan gasket - one inside & one outside?
Quote:
Ronieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH |
|
10-26-2020, 07:10 PM | #10 |
Senior Member
Join Date: Dec 2018
Location: Southbury Ct
Posts: 147
|
Re: Truck oil pan gasket - one inside & one outside?
The spot welded bolts would make perfect sense. I wonder if somebody sells that ring with the bolts attached? Even if they did I don't think i could get it into the pan without removing it which is impossible to do with the engine installed
|
10-26-2020, 07:29 PM | #11 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 1,052
|
Re: Truck oil pan gasket - one inside & one outside?
Best fix here is weld a round cover on the pan and use a 1/2-20 GM drain plug welded in the center!
We've done a number of these to date! Thanks, Gary in N.Y. P.S. Here's a few shots of the fix on a more recent build! If you look very closely this one also has our dipstick-adapter installed to make it "removable" without dropping the pan. Easy to change the adapter gasket if necessary??
__________________
http://www.stromberg-bulletin.com/me...berg-equipped/ |
10-26-2021, 10:51 AM | #12 | |
Junior Member
Join Date: Apr 2021
Posts: 2
|
Re: Truck oil pan gasket - one inside & one outside?
Quote:
Good morning, I was doing some reading and came across a post mentioning a dipstick adapter that may be available for the Flathead. Would you happen to have one available to purchase? Thank you for your time. Sam |
|
10-26-2021, 01:56 PM | #13 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,409
|
Re: Truck oil pan gasket - one inside & one outside?
Sam, welcome to the Barn. Gosfast died in the last year or so and I don't know if his business is still in operation. I think there is a discussion on here where he showed more details of the dipstick adapter he came up with. You could search this forum for the discussion, maybe use the advanced search and include his user name.
You could also try contacting Michael Driskell at Third Gen Automotive, he may have an adapter with attaching hardware. |
10-26-2021, 02:59 PM | #14 | |
Senior Member
Join Date: May 2015
Posts: 8,449
|
Re: Truck oil pan gasket - one inside & one outside?
Quote:
__________________
The only thing nice about being imperfect is the joy it brings to others.... "Silver rings, your butt! Them's washers!" "We shot our way out of that town for a dollar's worth of steel holes!" - from 'The Wild Bunch' - 1969 https://www.youtube.com/watch?v=7NReUd2_0u0 |
|
10-26-2020, 09:51 PM | #15 | |
Senior Member
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,559
|
Re: Truck oil pan gasket - one inside & one outside?
Quote:
Your correct the original ring will not go in the opening from the outside of the pan. However I bet with a slight modification the ring can be installed from the outside. To remove the oil pan I think you remove the steering tie rod then the oil pan should come off. If you find you can be removed the oil pan I'm sure I have an extra ring in stock if you decide to just use the pan you already have. Or if you prefer something better I have plenty of oil pans in stock and I'm located a short drive from where you are in CT. Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish. "Life Member of the Bonneville 200 MPH Club using a Ford Flathead block" Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline. First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH |
|
10-26-2020, 09:20 PM | #16 |
Senior Member
Join Date: Dec 2018
Location: Southbury Ct
Posts: 147
|
Re: Truck oil pan gasket - one inside & one outside?
Could you weld it with the pan still installed, or do you have to remove the pan from the engine? I am thinking removed due to the high heat or open flame of welding
|
10-26-2020, 09:34 PM | #17 |
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,653
|
Re: Truck oil pan gasket - one inside & one outside?
I agree it would have to be removed to keep the weld clean of oil.....Mark
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
10-27-2020, 07:29 PM | #18 |
Senior Member
Join Date: Dec 2018
Location: Southbury Ct
Posts: 147
|
Re: Truck oil pan gasket - one inside & one outside?
This engine is physically bigger than the original i believe, Sure looks like it would need to be pulled to change the pan.The pan on the car now hits the tie rod when turning left. I was told I need the mercury car pan and I did buy one from eBay a while ago, Still need the right pickup and pump though. I also do not want to pull the motor anytime soon
|
10-29-2020, 08:25 PM | #19 |
Senior Member
Join Date: Dec 2018
Location: Southbury Ct
Posts: 147
|
Re: Truck oil pan gasket - one inside & one outside?
Anybody know the Torque for the clean-out fasteners?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|