The Ford Barn

bigd1101 · 06-29-2022, 11:37 AM

Of course, while moving the small rod on the carb ( I believe the accelerator pump) attempting to put the tiny clip back on it went "ping" into the great unknown!

The pic shows the small hair-pin clip. Does anyone know where I can get a replacement and the size of this little guy?

Don

Vics Stuff · 06-29-2022, 11:46 AM

As a recommendation , Go on E bay look up hairpin clip. A great resource on that site.
Vic

rockfla · 06-29-2022, 11:55 AM

MSC or McMaster Carr, Amazon, EBay, NAPA-Take that picture and the diameter of the shaft with you to the local NAPA, bet they have "something" for you!!!

Merc Cruzer · 06-29-2022, 12:15 PM

Ace Hardware has them for sure. While I was there, I also picked up a couple for the distributor vacuum arm, and they are allot smaller.

Mart · 06-29-2022, 01:40 PM

There might be one in a carb kit, if you might have one already.

Scott52 · 06-29-2022, 01:42 PM

Sponsored Links (Register now to hide all advertisements)

I just entered carburetor linkage clip and a bunch came up. Napa had them.

B-O-B · 07-01-2022, 02:56 PM

Any one of the carb builders probably have them.

cas3 · 07-01-2022, 03:02 PM

I would just put a cotter pin in there. Easy to get, and they dont fly away

34PKUP · 07-01-2022, 05:18 PM

Quote:

Originally Posted by cas3

I would just put a cotter pin in there. Easy to get, and they dont fly away

Don't believe I have ever seen that model carb. that has a cotter pin hole.
(unless you just like extra work?)

mike in tucson · 07-01-2022, 03:10 PM

Commonly called a "Jesus" clip because when it pops off and flys away,
you usually say "Jeeze"

06-29-2022, 11:46 AM	#2
Vics Stuff Senior Member Join Date: Jun 2013 Location: Reno Nevada Posts: 433	Re: Lost clip...... As a recommendation , Go on E bay look up hairpin clip. A great resource on that site. Vic

06-29-2022, 11:55 AM	#3
rockfla Senior Member Join Date: Mar 2014 Location: Jacksonville FL Posts: 4,804	Re: Lost clip...... MSC or McMaster Carr, Amazon, EBay, NAPA-Take that picture and the diameter of the shaft with you to the local NAPA, bet they have "something" for you!!!

06-29-2022, 01:40 PM	#5
Mart Senior Member Join Date: May 2010 Location: Solihull, England. Posts: 9,083	Re: Lost clip...... There might be one in a carb kit, if you might have one already.

06-29-2022, 01:42 PM	#6
Scott52 Senior Member Join Date: Feb 2020 Posts: 194	Re: Lost clip...... Sponsored Links (Register now to hide all advertisements) I just entered carburetor linkage clip and a bunch came up. Napa had them.

07-01-2022, 02:56 PM	#7
B-O-B Senior Member Join Date: May 2010 Location: Ft Mohave,Az Posts: 2,013	Re: Lost clip...... Any one of the carb builders probably have them.

07-01-2022, 03:02 PM	#8
cas3 Senior Member Join Date: Jan 2011 Location: Beverly Kansas Posts: 5,297	Re: Lost clip...... I would just put a cotter pin in there. Easy to get, and they dont fly away

07-01-2022, 03:10 PM	#10
mike in tucson Senior Member Join Date: Dec 2010 Location: Tucson, AZ Posts: 177	Re: Lost clip...... Commonly called a "Jesus" clip because when it pops off and flys away, you usually say "Jeeze"