|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
![]()
For those of you who are interested in installing correctly the frame to front fender and splash aprons Anti-Squeak strips (and then some), please go to my website www.plucks329s.org and go to Additional Studies to find the document. It is titled "Squeak, Squeak, Squeak...Where is My Anti-Squeak?"
Thanks to all who helped out on this project. (Thanks Dan!) Pluck |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Fresno, Ca.
Posts: 3,636
|
![]()
Steve...
Another excellent article.....! |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,187
|
![]()
Steve,
The article was very good. You must have worked on it a long time. Nice job. Rusty Nelson |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: May 2010
Location: Mill Creek WA.
Posts: 341
|
![]()
Great Article Steve ,vyou are such a HUGE asset to the Model A Community .
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2010
Location: Claremont, CA 91711
Posts: 244
|
![]()
Steve, Thank you. I am right at that part of my project. I place my strips on the frame and used a ballpeen hammer to cut the hole in their respective positions. I will be sure to cut out the rivet holes - thanks to your information. Bill
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Feb 2011
Location: Cocoa, Florida
Posts: 1,609
|
![]() Sponsored Links (Register now to hide all advertisements)
http://www.plucks329s.org/pdf/studie...EAKARTICLE.pdf
__________________
Wanted: Simmons Super Power Head ![]() Craig Likon 1931 150B |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|