howells sheet metal

[machine girl]

anyone having trouble getting there parts

[zzlegend]

that and trying to contact them

[BILL WILLIAMSON]

"Maybe" they're busy, makin' a film for the VELOCITY CHANNEL??
bILL w.

[quickchange]

Received a pair of 29 closed cab rear corners via a dealer , only to find they are 3/4" overall too wide compared to originals & now new top wood rear bow will not fit , not having much joy in complaining too supplier , anyone else found them to be incorrect?? & if so how to correct rather than making a new rear top bow ?

[flatford39]

Originally Posted by quickchange

Received a pair of 29 closed cab rear corners via a dealer , only to find they are 3/4" overall too wide compared to originals & now new top wood rear bow will not fit , not having much joy in complaining too supplier , anyone else found them to be incorrect?? & if so how to correct rather than making a new rear top bow ?

I am using a set of theirs on my pick up as well. Not having that problem. There was some minor trimming but nothing major.

As far as customer service goes if you can wait 6 months to a year for your parts your good to go. Otherwise buy them somewhere else. And if the part shows up damaged....just forget about a refund. It won't happen as they don't answer the phone.

This is probably the worst business model I have ever seen. Now if you live in or around Beaumont Texas and can pick up your parts I would probably buy from them but never again on the internet site.

[117harv]

Sponsored Links (Register now to hide all advertisements)

You must be new to the hobby.

Home > Business or Charity Reviews > sheet metal work > Howell's Sheetmetal Company
BBB Business Review

• overview
• complaints
• directions

This Business is not BBB accredited

Howell's Sheetmetal Company

Phone: (409) 838-3673 Fax: (409) 838-9988 View Additional Phone Numbers 3830 Hollywood St, Beaumont, TX 77701 http://www.fordor.com ! There is an alert on Howell's Sheetmetal Company !




On a scale of A+ to F Reason for Rating BBB Ratings System Overview

[Domino]

Lots of poblems reporte to me ith htis outfit - oters say their are quite good.

[firetique57]

With his record/reputation I'm surprised ebay still lets him sell. He is the poster child for how NOT to run a business. I waited 6 weeks on 28 cab corners(reported to be in stock). Multiple attempts to email and call with no response finally filed a complaint with eBay and paypal and received a refund with a nasty gram from him. My suggestion is don't walk away RUN!

[Y-Blockhead]

THAT's not good!!!

[quickchange]

Yes , I purchased from a dealer & their advert says an exact copy of originals, Had we known they were from Howells might have repaired originals & still might have too. I bet a stirrfry would have done them right ???

[John Duden]

I'd order right from snyders or macs, that way you know if they are in stock. I bought my parts from snyders and they came in good time. I would rather spend a little extra to have a good customer service and have them in good time
John

[ericr]

-and so much for the "good old made-in-America" canard that circulates in the Barn.

[bart78]

Any time you order sheetmetal patches. There will be some work involved. I've never seen one perfect. Try making patch panels. You don't need all the fancy machines to make model a stuff.

[neds29]

I ordered from Howells back in the early '70's. Didn't hear for around 6 months and finally got through to him on the 'phone. "Haven't made those parts yet" he said. "Send me my money back" I said. He did. Guess he hasn't improved any since. Ned

[Mike V. Florida]

A search here will show that one should not deal directly with them but rather buy their good through another vendor.

[Tom Wesenberg]

Rusty likes them so much I think he was going to buy stock in the company. ......well, maybe not!

The only thing I bought from them was a pair of engine pans, and they look like they were cut out using a pair of dull tim snips.

[machine girl]

But why do they tell you in stock will ship the next day? they have our money, than when after many tries someone picked up the phone and gave us a dummy tracking number.

[wrndln]

Real funny Tom! I have expressed my attitude about Howell's many times here on Fordbarn. Lets just say that if Howell's were the last company on earth, I still wouldn't buy anything from them. They deserve the F rating for customer service and the poor quality of most of their items from the BBB. The most pathetic item I bought from Bratton's unfortunately without asking who made it, was the stiffening channel that clamps together the upper and lower rear panels of a 28/29 CCPU. It was $10 and not worth even close to that price. It was formed terribly wrong and was made out of 3 or 4 gauges of thinner metal than the original. Bratton's, with my urging, decided to have the correct stiffener made. Bratton's sent me one and it was perfect in every way. I have recently found that Ahooga Reproduction Parts in Ohio (they were at the MARC meet in French Lick this year) are making a lot of patch panel and other model A items (mostly sheetmetal parts) and all or nearly all are die stamped, not roll formed like the crappy Howell's parts.
Rusty Nelson

[ericr]

Originally Posted by wrndln

Real funny Tom! I have expressed my attitude about Howell's many times here on Fordbarn. Lets just say that if Howell's were the last company on earth, I still wouldn't buy anything from them. They deserve the F rating for customer service and the poor quality of most of their items from the BBB. The most pathetic item I bought from Bratton's unfortunately without asking who made it, was the stiffening channel that clamps together the upper and lower rear panels of a 28/29 CCPU. It was $10 and not worth even close to that price. It was formed terribly wrong and was made out of 3 or 4 gauges of thinner metal than the original. Bratton's, with my urging, decided to have the correct stiffener made. Bratton's sent me one and it was perfect in every way. I have recently found that Ahooga Reproduction Parts in Ohio (they were at the MARC meet in French Lick this year) are making a lot of patch panel and other model A items (mostly sheetmetal parts) and all or nearly all are die stamped, not roll formed like the crappy Howell's parts.
Rusty Nelson

not to quibble, but I looked at their website and it remains unclear to me what they actually make and what they obtain from other sources.

[AHOOGA A & T]

This is AHOOGA A & T

We don't make everything, but everything we sell, we make.

As a rule, we do not buy from other manufacturers and resell their parts.

Sometimes, for special occasions or customers request, we will order parts for you from these dealers. But we will tell you ahead of time where we get them if we do that.

All of our products are made right here in the U. S. A. in our shop. Most of the parts we make are stamped from our dies in our stamping presses.

We do most of our business wholesaling to and supplying other dealers. Probably your favorite one too. We encourage you to buy from them or you can buy directly from us.

And if there is a problem with one of our parts, we will give you your money back or a replacement. Whichever you want.

Our web site is not perfect and we make a lot more than what is listed on it. We are working on improving our web site but it is just another one of the irons in the fire. Please be patient.

We make parts for Ford Model A's, Model T's and Early Ford's.

If you want to place an order from us, our contact information is as follows.

AHOOGA A & T Reproduction Parts
310 Conover Dr.
Franklin, Ohio 45005
937-746-7105 P
937-746-7106 F
[email protected]

We will try to answer your questions or inquiries as soon as we get them.

Thank you,
The "AHOOGA BOY'S"
Dale and Steve