|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
![]()
As we work on these old cars, customer service conversations sometimes get interesting.
Once such conversation occurred at NAPA. "I need a coil for '53 ford" "we can't get stuff that old" "Your site shows one. Part No. xxxxxx" "My computer doesn't accept '53". "Try it anyway, please". "Well look! a coil for a 53 Ford!" Today it was glass setting tape. I picked up the glass for my '39 PU. Nicely cut and nice finished edges. Nice tint. "I need some glass setting tape for that." "We don't use tape. Doesn't stick well". "It isn't sticky". "Well then how does it stick"? "It doesn't. Never mind". So I called another auto glass specialty shop. "Do you sell auto glass setting tape"? "You mean the blue stuff that hold the windshield in while it dries"? "No, I mean the stuff that you wrap around the edge of the glass before one pushes it into the frame". It should be thin, looks like electrician's tape". "What does electricians tape look like? We have some tape that's 1 1/2 inch". "I believe that's width. I need thin-thickness like 1/32". "Oh, thickness! Butyl". "You have butyl tape"? "No. Butyl is illegal anyway. We can't take the risk. I better get a technician. You mean you want a windshield gasket....." "No, setting tape". "We urethane the windows in". "You have urethane tape, or is like caulk or glue"? "Yea, it comes in a tube". "Guess we're not on the same page". "Just tell us year and model of the vehicle - we'll get the right stuff". "1939 Ford Pickup". Silence. "OOhhh". I gave up and ordered it on the internet. I know all young parts people are not like this, but sometimes it's funny! "
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes.. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Sep 2014
Location: oroville calif
Posts: 893
|
![]()
well I see you walked into my world, I was in a NAPA store to pick up a set of points for my car, a young,19, maybe kid came over and ask what I needed, I told him a set of points and condenser for a 57 Studebaker 289 v/8 engine, he said ok, went to the parts catalog and turned a few pages, looked confused, and ask me, who makes Studebaker? all older parts guy looked up at me and just shook his head, he looked over at the young man and said, STUDEBAKER makes Studebaker, lord have mercy on us restorers when all the old parts guys pass on or retire
Last edited by WestCoast; 01-07-2015 at 10:58 PM. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Dec 2010
Location: North of sandy ago, CA.
Posts: 2,070
|
![]()
Thirty plus years ago I was in the Hi Desert at a locally owned auto parts store.
Watcha need? I want a 12 volt universal starter solenoid ford type. Watcha gonna put it on? 1975 Harley Davidson. We ain't got no bike parts. Is anyone else here? This was before computers. Bruce
__________________
Works good Lasts long time |
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Feb 2013
Location: Eureka Calif.
Posts: 969
|
![]()
I walked into our local parts house.They know me by name and I know them as well.Good people.The owner asked me what I needed. I said "A set of points for a blue Ford". He gave me a set of points.I hate being upstaged.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
![]()
For many years, parts men were almost always mechanics, like myself, who got too old and creaky to be much help in the shop, so their years of practice came to the parts room. Over sixty years ago, those of us who were long on ambition, but short on experience, could go to the window and receive just what we needed. Those days are mostly gone. I overheard a counter man in a local national brand parts store tell a customer who asked a question "I'm a parts guy, not a mechanic". That sums it up in today's world.
|
![]() |
![]() |
![]() |
#6 | ||
Senior Member
Join Date: Jan 2012
Location: Lyman,ME.
Posts: 2,672
|
![]() Sponsored Links (Register now to hide all advertisements)
Quote:
Quote:
__________________
I'm thinkin' about crankin' My ragged ol' truck up and haulin' myself into town. Billy Joe Shaver |
||
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Oct 2010
Location: Orem, Utah
Posts: 5,762
|
![]()
Here's mine this week at Jiffy Lube. I just went in for a lube job, not oil change, just lube. They've done it many times but it's been awhile since I was in (Old Henry spent 3 months in the hospital for engine work). I pulled up and an enthusiastic new young woman rushed up. Didn't ask what I wanted before she swooned over the car with much praise. I said I just needed a lube job. "Oh, no problem. I'm a "hotrod person" and know where all the grease fittings are." I pulled into the garage and tried handing her my lube diagram showing the 19 fittings. She looked at it, "Wow, 19? I thought they only had 6 or 8." "Better use the diagram," I said, and she dove under the car. It wasn't long before she started complaining and groaning, "Wow, this car sure is "grease heavy". I asked her to check the tranny and diff oil. She tried and was groaning and grunting and whining struggling to get the tranny plug off. Eventually she claimed to be done. "Did you get all 19?" "Oh yeah." (She's a "hot rod person" remember.)
When I got home I had to lift the front end for something and, sure enough, she'd only got the bottom king pin zerks. Missed the top ones. I consider those the most important. So much for "hot rod people" and their "expertise." ![]()
__________________
Prof. Henry (The Roaming Gnome) ![]() "It is good to have an end to journey toward; but it is the journey that matters, in the end.” *Ursula K. Le Guin in The Left Hand of Darkness |
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: May 2010
Location: Capital of Corruption , NY
Posts: 817
|
![]()
At NAPA. I always search their great online site for whatever I need. Then, get the part # and go there with it or call to see if they have it. I have a warehouse near me that usually has everything. Counter people usually can't research our old stuff.
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,991
|
![]()
walked into a auto zone and asked for 180 degree thermostat, cp asked me for what year. I said it is a 54mm chev thermostat, the look and the attitude went down from there. cp said we cannot gaurantee that part as it is not correct for the car. I turned around and left. went to car quest and a car guy cp said no problem, looked it up and handed it to me. my old line auto parts store closed up, boy do I miss Vissage Auto and Jimmy!!!
|
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Sep 2014
Location: oroville calif
Posts: 893
|
![]()
Flatford8, your right, but, the old guys learned, this new crop of c/p never will, if its not in the computer it isn't made, autozone as a prime example, they don't have a parts book in the store and wouldn't know how to use it if they did,, no one to teach them, the old ways are dyeing fast
|
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Jan 2012
Location: Roswell NM
Posts: 162
|
![]()
I go to Car Quest for my parts.Counter help are mostly Ladies, they seem really interested in looking up older car parts for me. Usually all 3 of them are digging out the old books in the back. They usually want me to bring the car back to see the parts installed,nice group of helpful ladies.
|
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: May 2012
Location: u-rah-rah-Wisconsin
Posts: 1,147
|
![]()
Actually, in my experience, the issue isn't age but atitude. The one willing to bother looking at the physical books rather than just tapping the keyboard is helpful. Really, the best practice is to research online and walk in with a fair to good sense of the right part to prevent the back and forth syndrome.
|
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: May 2010
Location: Lithia, FL
Posts: 1,052
|
![]()
Forty Niner is spot-on. Research their websites for parts availability; provide the part number to the counter guy or gal and you will save yourself a ton of frustration with the puzzled looks or attitudes. Has worked for me every time I needed a part from the local parts houses. Steve
__________________
If it aint broke, don't fix it! |
![]() |
![]() |
![]() |
#14 | |
Senior Member
Join Date: Jul 2010
Location: Plainfield, IN
Posts: 360
|
![]() Quote:
Blu Dice
__________________
4 doors are better than no doors! |
|
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: Mar 2011
Location: New Brunswick, Canada
Posts: 1,013
|
![]()
I do CARQUEST also. They know me by name......the lady there behind the counter does an excellent job of taking the time to try and source my old parts. NAPA didn't want to spend to much time with me so, I no longer visit them.
|
![]() |
![]() |
![]() |
#16 |
Senior Member
Join Date: Aug 2011
Location: Northern Colorado
Posts: 506
|
![]()
Didn't mean to make this so much about old and young, but guess my title did. It was more about current state of affairs.
More about not listening (or me not explaing well)? Many companies I deal with dont even have service reps. If you can a hold of a person, they say I should of looked at thier forum - often no employees there. Ya run into the same stuff at home stores. We might blame our generation too. We want old style service at low wages and low prices, dont we? I was thinking about our recent complaints about Ford vendors. Im sure glad they are there.
__________________
Don't mind learning from my mistakes. Just wish I didn't learn EVERYTHING from my mistakes.. |
![]() |
![]() |
![]() |
#17 |
Senior Member
Join Date: Nov 2012
Location: West Berkshire, United Kingdom
Posts: 368
|
![]()
When Googling NAPA the following came up:
http://www.napa-activities.co.uk/ NAPA stands for National Association for Providers of Activities for Older People Got to say it gave me a giggle in view of this thread ![]() Have to agree on all the sentiments expressed. I worked in a Ford dealer for a number of years and the parts counter guys were excellent, recognising parts on sight, knowing the equivalents across models etc. I know cars are more complex now but I think pride in the job is the main problem....
__________________
Kevin Flood West Berkshire UK Member MAFCGB, VHRA, SAH, Brooklands Trust Sporadic progress on My 1929 Sport Coupe can be found here along with my blog ![]() http://automotiveamerican.com/ |
![]() |
![]() |
![]() |
#18 |
Senior Member
Join Date: May 2010
Location: CLAYTON DE
Posts: 1,286
|
![]()
Two recent stories to share, the CP at Advance Auto denied carrying lug nuts for anything as old as '48 Ford. I differed and made him look it up. He then became amazed at the number of parts they listed for old Fords.
Next, I think funnier, I stopped in the local hardware store to pickup a couple fender washers. The young man walking the floor seemed quite amused, He told me I was in the wrong store "we don't handle auto parts" as he beckoned me to leave.
__________________
Enjoy yer day. Tom ![]() Hate can't fix what it started. |
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: May 2010
Location: Powell, TN
Posts: 2,522
|
![]()
Its not just our true antiques, these jerks do not know what point ign systems are, they do not know how to look up interchangeability. Every time I work on my 94 F250 axles, they try to give me the wrong bearings and seals or only the most expensive. Most fooks do not know that at Autozone there are different price ranges for the same item and quality is about the same.
|
![]() |
![]() |
![]() |
#20 |
BANNED
Join Date: May 2010
Posts: 3,019
|
![]()
Here's the real rub, the new counter brats don't give a s--t. It is far from what Flatford
mentioned, the counter brats do not want to learn for the most part. Don't you love it when you walk into a parts store and the ex burger flippers roll their eyes, the veteran guy, who the brats should be glued to, takes care of your order pronto. Charlie ny |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|