Sponsored Links (Register now to hide all advertisements)
The attached picture is a 35 pickup window door channel kit I purchased to install in my truck. I purchased the truck dis-assembled so no opportunity to see it all together.
In the picture are the parts to one door from the channel kit. I have the top piece and the two pieces on the left hand side figured out but I am struggling with where the other four pieces go in the door channel. The three pieces on the right are flat about 1/2" wide with a fuzz edge that would appear to go against the door glass. The 4th piece from the right is a channel approx. 10" long and1/2" deep.
If anyone has knowledge or experience putting this kit in and can share I'd be grateful. Thanks