|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
|
![]() |
#1 | ||||
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,345
|
![]()
Model A Harmonic Balancer discussion continued from earlier Thread. https://www.fordbarn.com/forum/showt...bration+damper
I felt I was high jacking this thread on Gear Backlash by continuing to ask questions on Engine Restorations LTD Harmonic Balancer so I started this new thread. From previous thread; Quote:
Quote:
Quote:
Quote:
I received my harmonic balancer today. Nice piece. Weighs 5 - 5 1/2 lbs. Can I assume with the “reverse scroll” that a modern lip seal can not be used? I’m running a modern seal now. I did pose this question to Murray but have not heard back yet. I was just wondering if anyone on the Barn had experience with this. ![]() ![]() Thanks, Ruth |
||||
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,566
|
![]()
From New Zealand. I've heard good reports but haven't had a chance to try mine yet. SOON though.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: Aug 2010
Location: SF Bay Area
Posts: 216
|
![]()
I contacted him also and had the same question regarding the spiral on the seal surface, but I have not asked if they are available without the spiral, as I want to run a modern seal in the front and a lip seal won't last long with the spiral.
|
![]() |
![]() |
![]() |
#4 |
BANNED
Join Date: May 2010
Location: Wa.
Posts: 5,423
|
![]()
You could put a Speedisleeve on it.
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,345
|
![]()
Yes from New Zealand. I just heard back from Murray. He confirmed to use the rope seals. It will be a bit before I can install mine also.
|
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,345
|
![]() Sponsored Links (Register now to hide all advertisements)
That may be something to look into. Last edited by Ruth; 05-16-2019 at 10:00 AM. |
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,057
|
![]()
So, it appears that were you to break a fan belt, you would have to remove the front pulley in order to replace it?
__________________
Bill Worden 1929 Roadster 1929 Briggs Town Sedan 1930 Closed Cab pickup Smith Motor Compressor 1951 Ford F1 High Desert Model A's |
![]() |
![]() |
![]() |
#8 | |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,345
|
![]() Quote:
I am going to carry one of these belts with me 'just in case'. ![]() |
|
![]() |
![]() |
![]() |
#9 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,125
|
![]()
Where do you get this type of belt?
__________________
Alaskan A's Antique Auto Mushers of Alaska Model A Ford Club of America Model A Restorers Club Antique Automobile Club of America Mullins Owner's Club |
![]() |
![]() |
![]() |
#10 |
BANNED
Join Date: May 2010
Location: Wa.
Posts: 5,423
|
![]() |
![]() |
![]() |
![]() |
#11 |
Senior Member
Join Date: Mar 2013
Location: Bend Or.
Posts: 1,057
|
![]()
I had forgotten about those! I used to keep one for industrial emergency use. They work well and are flexible. Good solution!
__________________
Bill Worden 1929 Roadster 1929 Briggs Town Sedan 1930 Closed Cab pickup Smith Motor Compressor 1951 Ford F1 High Desert Model A's |
![]() |
![]() |
![]() |
#12 |
Senior Member
Join Date: May 2010
Location: In my garage
Posts: 465
|
![]()
I have a 31 tutor. I’ve changed a few fan belts in the past 20 years and I have enough clearance to change the belt without removing the pulley. Isn’t that the way it should be?
__________________
31 Tudor 66 Bonneville 57 Chevy pickup 27 T roadster pick up |
![]() |
![]() |
![]() |
#13 |
Senior Member
Join Date: Apr 2011
Location: New Zealand
Posts: 444
|
![]()
I'm running a modern seal with my harmonic balancer without problems or leaks.
|
![]() |
![]() |
![]() |
#14 |
Senior Member
Join Date: Jun 2014
Location: Melbourne, Australia
Posts: 7,566
|
![]()
They are available with or without the spiral so rope or modern seal compatible.
__________________
I'm part of the only ever generation with an analogue childhood and a digital adulthood. |
![]() |
![]() |
![]() |
#15 |
Senior Member
Join Date: May 2010
Location: Illinois
Posts: 2,194
|
![]()
What are the benefits of this balancer. I probably missed it because I did not see earlier threads.
John
__________________
Welcome each day |
![]() |
![]() |
![]() |
#16 | |
BANNED
Join Date: May 2010
Location: Wa.
Posts: 5,423
|
![]() Quote:
The heavier the damper/balancer or the lighter the flywheel/clutch assembly, the better. It has to do with reducing torsional vibration in the crank. You can't normally feel this vibration in the seat of the pants. |
|
![]() |
![]() |
![]() |
#17 | |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,345
|
![]()
I got it at Rubber Belts Online. They sell it by the foot. it is called PowerTwist Plus. The ⅝" size fits Model A pulleys.https://www.rubberbeltsonline.com/category-s/334.htm
Quote:
Does your harmonic balancer have the spiral? |
|
![]() |
![]() |
![]() |
#18 | |
Senior Member
Join Date: Jul 2015
Location: SouthWest Michigan
Posts: 363
|
![]() Quote:
I'm running a modern seal with mine, I've got about 400 miles on it sense installed and no issue's as of yet, and yes i do believe it makes a difference! Terry |
|
![]() |
![]() |
![]() |
#19 |
Senior Member
Join Date: May 2016
Location: Glide, Oregon
Posts: 1,345
|
![]()
I just wish it wasn't so RED!
![]() ![]() |
![]() |
![]() |
![]() |
#20 |
Senior Member
Join Date: Jun 2015
Location: Red Deer, Alberta
Posts: 5,111
|
![]()
It doesn't have to be red, there's different makes available.
__________________
If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn! |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|