|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
|
12-06-2019, 11:22 AM | #1 |
BANNED
Join Date: May 2010
Posts: 3,019
|
Help with a family issue
My wife will NOT ride in our soon to be running '32 pickup. She has discovered
she will be sitting over the gas tank. I've been advised that as long as I do not use a vented cap there is really no issue......she's not buying that. Can the passenger car tank be installed in the truck or what might be the best approach....and no after 58 years we are joined at the hip. Many thanks, Charlie ny |
12-06-2019, 11:29 AM | #2 |
Senior Member
Join Date: May 2010
Location: Montgomery, NY & Port St. Lucie Florida
Posts: 939
|
Re: Help with a family issue
I'm thinking about tucking a flat tank under the bed. Similar to a passenger tank but shallower. I would make it as wide as possible but keep it thin enough to be hidden by the bed. Perhaps extending some into the space between the bed and the rear crossmember.
Maybe a 34 style tank could be modified somehow. Not that far on the assembly yet. I will need a seat riser to replace the stock tank but that's easy enough to do, even use the stock cushions. Nice storage area under there too. Filler neck would have to come out the side like a 34 or in the floor of the bed.
__________________
Early Ford Lock & Key Service https://www.fordbarn.com/forum/showthread.php?t=46583 Last edited by 32phil; 12-06-2019 at 11:33 AM. Reason: more info |
Sponsored Links (Register now to hide all advertisements) |
|
12-06-2019, 03:01 PM | #3 | |
Senior Member
Join Date: Mar 2016
Location: LaGrande Oregon
Posts: 866
|
Re: Help with a family issue
Quote:
|
|
12-06-2019, 11:39 AM | #4 |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,269
|
Re: Help with a family issue
Thinking about it, Charlie, the bed and torque tube seem to complicate things. The floor of the bed is pretty close the torque tube. Not much space to mount something across the frame, but maybe a saddle type tank along the frame.
I think I remember some type of saddle tank set-up being made for Model A's. They mounted behind the running board splash aprons. Would you consider a Moon-style/spun aluminium-style tank mounted in the front of the bed? |
12-06-2019, 11:41 AM | #5 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,233
|
Re: Help with a family issue
Well, you must have a vented cap in my mind (or a vent someplace) - as otherwise the fuel pump is attempting to pull a vacuum and after a bit, it will not be able too and you'll be out of fuel. I think the frames are the same as any other 32, so it would seem entirely possible to put a 32 rear tank in the rear. Personally, I like the looks of the 32 tank - but don't know if there is any interference issues with the bed?
|
12-06-2019, 11:43 AM | #6 |
Senior Member
Join Date: May 2010
Location: upstate SC
Posts: 2,986
|
Re: Help with a family issue
Sponsored Links (Register now to hide all advertisements)
|
12-06-2019, 11:55 AM | #7 | |
Senior Member
Join Date: May 2010
Location: NJ
Posts: 6,269
|
Re: Help with a family issue
Quote:
|
|
12-06-2019, 11:52 AM | #8 |
Senior Member
Join Date: May 2010
Location: Hansville, WA
Posts: 778
|
Re: Help with a family issue
Charlie
I ran into the same dilemma with my wife and riding in the Tonner. It took a few drives on rural roads at reasonable speeds (less than 45 MPH) to convince her that the truck was a safe/stable platform. I use a vented gas cap and try to keep the tank full to minimize the buildup of gas vapors in the tank. If you don’t use a vented cap it seems like there would be more risk of explosion as the liquid is displaced leaving the resulting vapor buildup. Not only that but an unvented cap could cause fuel starvation. The other solution is to install a fuel cell in the bed and disguise it somehow. Les Williams |
12-06-2019, 11:56 AM | #9 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,130
|
Re: Help with a family issue
Charlie.....Just remind her of the Pintos with rear-mounted gas tanks! I also saw a '32 sedan burn to the ground after being rear-ended at a light several years back. DD
|
12-06-2019, 11:57 AM | #10 |
Senior Member
Join Date: May 2010
Location: QUICKSBURG VA
Posts: 718
|
Re: Help with a family issue
Also a non vented cap when things warm up causes high pressures in the tank that needle valve and flexible hoses can't take. One of them ask me how I know!
|
12-06-2019, 12:26 PM | #11 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,130
|
Re: Help with a family issue
You know, it would be nice if folks would actually know something about 1932-35 fuel tanks before sounding off. All Ford tanks of those model years use un-vented gas caps because the tanks are otherwise vented as part of the tank unit. The man is asking about a '32 vented tank, not some later model un-vented tank.
|
12-06-2019, 12:29 PM | #12 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,679
|
Re: Help with a family issue
Charlie, if she wanted to ride in it, she would. Don't buy into her power trip ruse, or she'll then demand seat belts and next it would be ABS disc brakes. I know you're not a newly wed, you know the routine!
__________________
Alan |
12-06-2019, 12:44 PM | #13 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,329
|
Re: Help with a family issue
Charlie,
Yes it can be done using a 33/36 pickup tank but requires lots of fabricating, a guy locally did it..... however, there is nothing to be scared of. Ford had trucks using in cab tanks all the way up through 1977. If a person were overly nervous about the fact that the 32 tanks vent from inside the cab, you could do what I did when I owned a 32 pickup, I ran a clear piece of hose from the vent on the sending unit and vent it outside of the cab. It’s a 5 minute ordeal that can be undone at any time. |
12-06-2019, 03:39 PM | #14 |
Senior Member
Join Date: Jun 2012
Location: Long Island,NY
Posts: 1,564
|
Re: Help with a family issue
My '32 has it's gas tank in the rear, the stock location. If I get rear ended, it's a virtual bomb. My Model A has it's tank over my legs with the vented filler cap on the top of the cowl. What am I supposed to do, not drive my cars and try to relocate the gas tanks? We are driving antique cars, not modern vehicles and sometimes they smell of gas and oil.
|
12-06-2019, 04:07 PM | #15 |
Senior Member
Join Date: May 2010
Location: new britain,ct 06052
Posts: 9,393
|
Re: Help with a family issue
All thru the years , from the T on up millions of people drove these cars AND smoked............
What about mounting a tank (your choice of type) in the bed behind the cab?? Paul in CT |
12-06-2019, 04:19 PM | #16 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,508
|
Re: Help with a family issue
She likely wouldn't ride in a model T or even a model A either since the gas tank is right in front of you. Some folks just don't like the dangerous edge type of lifestyle.
All those soldiers that rode around in jeeps over half the word over were also riding on gas tanks. I've been riding motorcycle since I was a kid and the tank is usually right near your crotch there. Everyone has an excuse for this or that. If she doesn't want to ride in there then it's her loss. Some folks are scared to go out the door so she is not too bad off anyway. It could be worse. |
12-06-2019, 04:45 PM | #17 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,130
|
Re: Help with a family issue
Michael,
It's not a Model A. '32 commercial gas tanks do not vent inside the cab unless you operate the vehicle without floorboards, which is a whole set of real dangers. |
12-06-2019, 06:47 PM | #18 | |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,329
|
Re: Help with a family issue
Quote:
My mistake. I remember now that I had to do that as my pickup had a boogered up tank that someone modified and vented out of the top of the tank. |
|
12-06-2019, 08:04 PM | #19 |
Senior Member
Join Date: Jan 2011
Location: Central Ohio
Posts: 5,233
|
Re: Help with a family issue
Hey DavidG, as I've never owned a 32 pickup, where does the tank actually vent too? If the tank is under the seat (my assumption from reading this thread), then how/where do the venting vapors go?
|
12-10-2019, 09:48 AM | #20 | |
Senior Member
Join Date: May 2010
Location: Snohomish,WA
Posts: 1,040
|
Re: Help with a family issue
Quote:
David, If I understand the truck tank design, the venting is through the fuel sender which installs from the bottom of the gas tank? |
|
Thread Tools | |
Display Modes | |
|
|
Sponsored Links (Register now to hide all advertisements) |
|