Who has a pickup and fitted it with rear bumper bars

[woofa.express]

I'd like to hear from anyone who has fitted rear bumpers to a pickup. On this thread or by private message please.

[CarlG]

I have

[ModelAMike1930]

Here is my installation.

[Synchro909]

Mine has the bumperettes from a car fitted. P/Us weren't sold here so this is a vehicle I brought into the country. The bumpers were already fitted but were only good for show so I redid them so that they would contribute something in the vent of someone ramming the rear end.

[woofa.express]

Originally Posted by Synchro909

Mine has the bumperettes from a car fitted. P/Us weren't sold here so this is a vehicle I brought into the country. The bumpers were already fitted but were only good for show so I redid them so that they would contribute something in the vent of someone ramming the rear end.

I'll check yours when I visit, which would have been last weekend but for heavy rain on Friday. I asked about bumpers but obviously should have said bumperettes, which I have purchased some time ago along with the brackets which would have come from a sedan or tourer and I had expected them to bolt straight on. Wrong.

[CHuDWah]

Sponsored Links (Register now to hide all advertisements)

Originally Posted by ModelAMike1930

Here is my installation.

Is that an aftermarket cab and bed on your truck?

[ModelAMike1930]

Originally Posted by CHuDWah

Is that an aftermarket cab and bed on your truck?

No its not , it was a peddlers truck and the guy before me chopped it up. Here is what it looked like when I got it.

[Jembow]

I also want to fit bumpers on my 28rpu, probably with a tow hitch. Would like to see details on your brackets.

[[email protected]]

szRlQatGShOXDk6r26Bm2A.jpg

Not only on pickup trucks....

[[email protected]]

https://www.ebay.com/itm/264910369172

I was not able to download these good pictures of a pickup with the split rear bumpers. So please follow the hyperlink to an EBay listing of a Model A PU. Doesn’t look bad at all.

[[email protected]]

32114D22-5A0F-4682-8F2E-6FA72480028A.jpg

Found another one..

I am planning on doing this rear bumper treatment to my 29 CCPU soon.. Awaiting for warmer temps in my garage.

[taffrail]

Autos 008.jpg

[woofa.express]

Originally Posted by taffrail

Attachment 454555

Do you know what's wrong with your ute?
It's parked in your shed and not mine!

[rocket1]

Originally Posted by taffrail

Attachment 454555

I have a 29ccpu I thought about rear bumpers but never acted on it.On your truck are those 2 tail lights void of the license lens and is the plate illuminated?

[CarlG]

Originally Posted by rocket1

I have a 29ccpu I thought about rear bumpers but never acted on it. On your truck are those 2 tail lights void of the license lens and is the plate illuminated?

Re: Post #2, not who the question was asked of, but:
My right tail light does not have the license lens, on the left side it still has the license lens. My plate is illuminated. I found a license frame that has a light in it.

[katy]

Hi Gary, my '31 CCPU had rear short bumpers on it when purchased, the PO used some 2X4s to "augment" the installation.
Here's some pictures:

[Russ/40]

Originally Posted by katy

Hi Gary, my '31 CCPU had rear short bumpers on it when purchased, the PO used some 2X4s to "augment" the installation.
Here's some pictures:

If possible, I would greatly appreciate how the main bracket is attached at the front. You have the rear, but have no clue as to the front of the iron.

[CarlG]

Originally Posted by Russ/40

If possible, I would greatly appreciate how the main bracket is attached at the front. You have the rear, but have no clue as to the front of the iron.

I don't have any pictures, but it bolts to the frame in the same place where the rear bumper supports for sedans and coupes do.

[woofa.express]

Thankyou Katy and other respondence. When I get home I'll compare your replys to what I've got. Tell you a story about my bumperettes. When Patsy and I travel outback we camp on roadside or by creeks and billabongs. One evening we camped where some low class citizen had dumped a load of trash which included Model-A bumperetes which I took home. A Melbourne fellow needed them and I didn’t so I gave them to him. When I bought what call my Model A, "woofa express" I decided to fit bumperettes. So I imported a set from America. Then I saw a set of longitudinal brackets them to so another purchase and bumperttes came too. That makes 3 sets and still haven't got a set attached to Woofa Express. But will have soon.

[katy]

Originally Posted by Russ/40

If possible, I would greatly appreciate how the main bracket is attached at the front. You have the rear, but have no clue as to the front of the iron.

I'll see what I can do about getting pictures of the front attachment.