The Ford Barn

reggiedog · 07-30-2011, 07:16 AM

HI: Got a funny q how to take the original dis apart so you can rebuild the parts or replace the parts. But how do you get it apart to do this or is it all bakelite theres a seam that goes down the middle of the top does that come apart. Or do you have to do it all from the inside and is there wires that run from the little tabe for the spark plugs and how do you get them out.And how do you get the bushings out and how many bushings are they're. Mine don't need rebuilding right now but it will sooner or later so I would like to know how to rebuild it. So I know how to do it when the time comes to do it or is there a book that tells you how to do it. Thanks let me know. reggiedog

07-30-2011, 07:16 AM	#1
reggiedog Senior Member Join Date: Jun 2011 Posts: 946	distributor rebuild HI: Got a funny q how to take the original dis apart so you can rebuild the parts or replace the parts. But how do you get it apart to do this or is it all bakelite theres a seam that goes down the middle of the top does that come apart. Or do you have to do it all from the inside and is there wires that run from the little tabe for the spark plugs and how do you get them out.And how do you get the bushings out and how many bushings are they're. Mine don't need rebuilding right now but it will sooner or later so I would like to know how to rebuild it. So I know how to do it when the time comes to do it or is there a book that tells you how to do it. Thanks let me know. reggiedog Last edited by reggiedog; 07-30-2011 at 07:49 AM.