|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-18-2013, 10:11 PM | #1 |
Member
Join Date: Sep 2010
Location: Trumann, AR
Posts: 38
|
1931 Murray Slant Window 4 Door Body
City:
Truman
State:
Arkansas
Price:
$2,700
1931 Murray slant window 4 door body (only) and all of the miscellaneous body parts shown. Fenders with splash aprons, new running boards, seat pan with all seat springs, front and rear bumpers with arms (bumper irons), top vinyl with padding, door scruff plates, new door handles (inside and out), door latches, window regulators, garnish moldings, gas tank, chrome windshield frame with glass, interior wood and top bows. I am not selling the frame, running gear, motor, transmission, radiator or grille shell. I am changing directions and going with a roadster body. 01 by Bib Overalls, on Flickr 02 by Bib Overalls, on Flickr 04 by Bib Overalls, on Flickr 06 by Bib Overalls, on Flickr
Click here to see 20 additional high resolution photos. http://www.flickr.com/photos/ratpois...7637737844025/ PM if interested or call Larry at 870-483-3250. Thanks for looking!! |
11-20-2013, 03:42 PM | #2 |
Member
Join Date: Sep 2010
Location: Trumann, AR
Posts: 38
|
Re: 1931 Murray Slant Window 4 Door Body
We incorrectly listed as Murray, car is actually a Briggs body. Guys I have a lot of parts that goes with the body!
|
Sponsored Links (Register now to hide all advertisements) |
|
11-20-2013, 06:42 PM | #3 |
Senior Member
Join Date: Nov 2011
Location: San Jose CA
Posts: 113
|
Re: 1931 Murray Slant Window 4 Door Body
The body shown is a Murray.... The top part of the door window frame is curved.... Briggs window frames were straight..
Your original listing is correct... Roger |
11-20-2013, 07:00 PM | #4 |
Senior Member
Join Date: May 2010
Location: Tennessee
Posts: 445
|
Re: 1931 Murray Slant Window 4 Door Body
Roger, your comment is correct as to non-slants; incorrect on slants.However, B & M slants are virtually the same. Small nuances such as rear valance, cage nuts vs d-nuts. Those woild be the litmus.
|
12-19-2013, 05:37 PM | #5 |
Member
Join Date: Sep 2010
Location: Trumann, AR
Posts: 38
|
Re: 1931 Murray Slant Window 4 Door Body
Thursday bump! $2200.00!
|
12-25-2013, 05:26 PM | #6 |
Junior Member
Join Date: Jun 2011
Posts: 1
|
Re: 1931 Murray Slant Window 4 Door Body
Sponsored Links (Register now to hide all advertisements)
|
12-26-2013, 07:22 PM | #7 |
Junior Member
Join Date: Dec 2013
Posts: 4
|
Re: 1931 Murray Slant Window 4 Door Body
The body looks like a Murray, has it been determined which it is? I assume the ID plates are gone from the firewall? I have a body that is in bad shape on my Murray.
|
12-31-2013, 08:21 AM | #8 |
Member
Join Date: Sep 2010
Location: Trumann, AR
Posts: 38
|
Re: 1931 Murray Slant Window 4 Door Body
New Price $2000.00! I need to sell this body and all of the parts. It is a Briggs body.
|
01-11-2014, 09:13 AM | #9 |
Member
Join Date: Sep 2010
Location: Trumann, AR
Posts: 38
|
Re: 1931 Murray Slant Window 4 Door Body
Weekend bump!
|
01-12-2014, 06:13 PM | #10 |
Senior Member
Join Date: Sep 2010
Location: Tucson Az
Posts: 165
|
Re: 1931 Murray Slant Window 4 Door Body
Who ever buys this, I have a very nice correct/clear frame, I might be able to deliver to Chickasha. Have other S/W sheet metal parts also.
As a side note, in addition to what Bill underwood said above, Briggs bodys were also identified buy a embossing located on the LH cowl, very bottom, just forward of the cowl band,hood must be opened. This car has the typical rust-out in that area. Murray had no markings in that area. Also, the insids of the doors just below the handles, a "B" was stamped in the metal. |
02-05-2014, 06:30 AM | #11 |
Member
Join Date: Sep 2010
Location: Trumann, AR
Posts: 38
|
Re: 1931 Murray Slant Window 4 Door Body
Back up! I will make someone a deal!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|