The Ford Barn

Orlfire53 · 12-29-2021, 10:01 AM

Recently purchased my 1st A, a 1928? CCPU. When starting it, the seat cushion will slid forward as I push on the starter. I removed the seat cushion from what appears to be the correct riser but found nothing that appears to be a bracket/clamp/etc that secures the cushion to the riser. The cushion was basically sitting on the riser. Both cushions have been reupholstered at some point but I don’t know if the seat frame is correct for the model year. Any suggestions, ideas, insight would be greatly appreciated.

12-29-2021, 10:01 AM	#1
Orlfire53 Junior Member Join Date: Dec 2021 Posts: 10	28 A CCPU Seat securing issue Recently purchased my 1st A, a 1928? CCPU. When starting it, the seat cushion will slid forward as I push on the starter. I removed the seat cushion from what appears to be the correct riser but found nothing that appears to be a bracket/clamp/etc that secures the cushion to the riser. The cushion was basically sitting on the riser. Both cushions have been reupholstered at some point but I don’t know if the seat frame is correct for the model year. Any suggestions, ideas, insight would be greatly appreciated.