The Ford Barn

rfv60 · 07-31-2010, 08:14 AM

been covered b4 but can't locate info on procedures and products to use for cleaning block/head cast iron parts for painting. appreciate the help. thank you

Russ/40 · 07-31-2010, 12:07 PM

Sponsored Links (Register now to hide all advertisements)

Solvent or mineral spirits to get all the grease off. Then, a wire wheel on your die grinder. Then repeat a scrub with solvent and a 3m scotchbrite pad. Soapy scrub, then paint.

07-31-2010, 08:14 AM	#1
rfv60 Junior Member Join Date: May 2010 Posts: 20	scrub-a-dub. cast iron prep been covered b4 but can't locate info on procedures and products to use for cleaning block/head cast iron parts for painting. appreciate the help. thank you

07-31-2010, 12:07 PM	#2
Russ/40 Senior Member Join Date: May 2010 Location: Santee, California Posts: 3,505	Re: scrub-a-dub. cast iron prep Sponsored Links (Register now to hide all advertisements) Solvent or mineral spirits to get all the grease off. Then, a wire wheel on your die grinder. Then repeat a scrub with solvent and a 3m scotchbrite pad. Soapy scrub, then paint.