|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Senior Member
Join Date: Jun 2010
Location: Montgomery, Al.
Posts: 640
|
![]()
I have all the screws out below the windshield but the dash does not want to come very easily. Do I have to remove the strip where the swing arms are mounted to get the dash out or do I have to force it out?
Thanks in advance for the FB assistance. Charles Never mind, I did not put enough pressure on the dash to remove. Thanks Charles Last edited by charlesea; 01-03-2013 at 12:56 PM. |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Fayetteville, Georgia
Posts: 472
|
![]() Sponsored Links (Register now to hide all advertisements)
As Don mentioned, there are also two screws (I believe its 2 per side) that screw into the wood or "d nuts" on the cowl side of the front door posts. Hope this helps. |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|