The Ford Barn

trainguy · 09-17-2012, 04:05 PM

I am planning on having my dashboard an window mouldings on my 41 S/W woodgrained.I need recomendations on who can do this for me. I live in N.E.Pa

mrtexas · 09-17-2012, 04:10 PM

I recommend this photographic process but not the place I sent mine:
https://sites.google.com/site/mrtexa...e/woodgraining
It is cheaper than by hand and looks really good.

trainguy · 09-17-2012, 04:13 PM

Texas ,Boy was that reply quick. Phil I have looked into the water transfer process but am unable to find a grain that matches the 41. Phil

DavidG · 09-17-2012, 07:21 PM

You may wish to consider Bill Gratkowski in Titusville, PA ([email protected]). He uses the original method and has a huge selection of the metal screens used in that method.

trainguy · 09-17-2012, 07:43 PM

Thanks David,I talked to him on the phone,he seems very professionel.He has a spot at Hershey,I will take my dash along
,just incase.Phil

Bruce/CT · 09-17-2012, 09:13 PM

Sponsored Links (Register now to hide all advertisements)

Hi Phil,
Please share his Hershey spot with us. I'd like to stop and talk to him
Bruce

trainguy · 09-18-2012, 08:52 AM

Bill Gratkowski's Hershey space is RSD3.Phil

DavidG · 09-18-2012, 10:47 AM

That space is way up in the corner of the red field behind the stadium, where he's been forever.

Bruce/CT · 09-19-2012, 03:08 PM

Thanks David,
I know where it is.
Bruce

felix37 · 09-19-2012, 05:36 PM

trainguy, I do wood graining same as original and have many of the original transfer plates. I work for Honest Charley Garage and we offer wood graining as a service. I have a few of my projects in my albums here on the Ford Barn so feel fre to check them out.
I will also be at Carlisle and Hershey so stop by and visit with me, I will be at the Coker Tire/ Honest Charley Speed Shop booths.
Jonathan

Jim · 09-21-2012, 07:59 PM

Awhile back someone had listed a location or sight that supplied the tools for woodgraining ie rollers ink etc. could anyone direct me to that sight or location? Thanks very much Jim

John R · 09-21-2012, 10:04 PM

Several members of our EFV8 Club Regional Group have gotten excellent results from:
Woodgrain Specialists
Littleton, PA
717-359-4597
www.woodgrainspecialists.com
Dan or Roger Hedges

Matt in Alameda · 09-22-2012, 01:14 AM

You want Grain-it Technologies in Florida....woodgraining.com....they sell several kits...I have had great results using their products....Matt in Alameda

09-17-2012, 04:05 PM	#1
trainguy Senior Member Join Date: May 2010 Location: Lehighton Pa Posts: 1,085	Woodgraining I am planning on having my dashboard an window mouldings on my 41 S/W woodgrained.I need recomendations on who can do this for me. I live in N.E.Pa

09-17-2012, 04:10 PM	#2
mrtexas Senior Member Join Date: May 2010 Location: Sugar Land, TX Posts: 4,420	Re: Woodgraining I recommend this photographic process but not the place I sent mine: https://sites.google.com/site/mrtexa...e/woodgraining It is cheaper than by hand and looks really good.

09-17-2012, 04:13 PM	#3
trainguy Senior Member Join Date: May 2010 Location: Lehighton Pa Posts: 1,085	Re: Woodgraining Texas ,Boy was that reply quick. Phil I have looked into the water transfer process but am unable to find a grain that matches the 41. Phil

09-17-2012, 07:21 PM	#4
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: Woodgraining You may wish to consider Bill Gratkowski in Titusville, PA ([email protected]). He uses the original method and has a huge selection of the metal screens used in that method.

09-17-2012, 07:43 PM	#5
trainguy Senior Member Join Date: May 2010 Location: Lehighton Pa Posts: 1,085	Re: Woodgraining Thanks David,I talked to him on the phone,he seems very professionel.He has a spot at Hershey,I will take my dash along ,just incase.Phil

09-17-2012, 09:13 PM	#6
Bruce/CT Senior Member Join Date: May 2010 Location: Middlebury, CT Posts: 782	Re: Woodgraining Sponsored Links (Register now to hide all advertisements) Hi Phil, Please share his Hershey spot with us. I'd like to stop and talk to him Bruce __________________ Failure is simply the opportunity to begin again, this time more intelligently.......Henry Ford

09-18-2012, 08:52 AM	#7
trainguy Senior Member Join Date: May 2010 Location: Lehighton Pa Posts: 1,085	Re: Woodgraining Bill Gratkowski's Hershey space is RSD3.Phil

09-18-2012, 10:47 AM	#8
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,601	Re: Woodgraining That space is way up in the corner of the red field behind the stadium, where he's been forever.

09-19-2012, 03:08 PM	#9
Bruce/CT Senior Member Join Date: May 2010 Location: Middlebury, CT Posts: 782	Re: Woodgraining Thanks David, I know where it is. Bruce __________________ Failure is simply the opportunity to begin again, this time more intelligently.......Henry Ford

09-19-2012, 05:36 PM	#10
felix37 Senior Member Join Date: Oct 2010 Location: Chattanooga, TN Posts: 1,093	Re: Woodgraining trainguy, I do wood graining same as original and have many of the original transfer plates. I work for Honest Charley Garage and we offer wood graining as a service. I have a few of my projects in my albums here on the Ford Barn so feel fre to check them out. I will also be at Carlisle and Hershey so stop by and visit with me, I will be at the Coker Tire/ Honest Charley Speed Shop booths. Jonathan

09-21-2012, 07:59 PM	#11
Jim Senior Member Join Date: May 2010 Location: Alto, Tx. Posts: 299	woodgraining supplies Awhile back someone had listed a location or sight that supplied the tools for woodgraining ie rollers ink etc. could anyone direct me to that sight or location? Thanks very much Jim

09-21-2012, 10:04 PM	#12
John R Senior Member Join Date: May 2010 Location: near Washington, DC Posts: 589	Re: Woodgraining Several members of our EFV8 Club Regional Group have gotten excellent results from: Woodgrain Specialists Littleton, PA 717-359-4597 www.woodgrainspecialists.com Dan or Roger Hedges __________________ Those who do not move do not die, but are they not already dead?

09-22-2012, 01:14 AM	#13
Matt in Alameda Senior Member Join Date: May 2010 Location: Alameda, California Posts: 335	Re: Woodgraining You want Grain-it Technologies in Florida....woodgraining.com....they sell several kits...I have had great results using their products....Matt in Alameda