|
|||||||
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
Thread Tools | Display Modes |
02-06-2012, 04:35 PM
|
#1 |
|
Senior Member
Join Date: May 2010
Location: OKC / Tonkawa, Ok.
Posts: 1,977
|
Cleaning up and found a surprise!
When I was replacing the rear spring on my coupe I noticed that the rear backing plates were looking a little rough. With the nice weather we are having around here I thought I would do a little clean up today. After scraping grease and paint I found this hole at the bottom or each rear backing plate. Having never messed with backing plates before I checked the literature I have and could not find a picture with this hole at the bottom. Is this correct? should their be some kind of plug here?
__________________
Oklahoma City Model A Restorers Group. |
|
|
«
Previous Thread
|
Next Thread
»
Threaded Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 02:13 PM.