Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 07-05-2011, 03:50 PM   #1
sethkestenbaum
Senior Member
 
sethkestenbaum's Avatar
 
Join Date: Jun 2011
Location: Westchester County, NY
Posts: 632
Default Cast Iron Sediment Bowl Maintenance

What is the correct procedure (step by step) to clean out the non-glass fuel line sediment bowl? How often should a Model A owner do so?

Thanks.
sethkestenbaum is offline   Reply With Quote
Old 07-05-2011, 04:00 PM   #2
Gary WA
Senior Member
 
Gary WA's Avatar
 
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,457
Default Re: Cast Iron Sediment Bowl Maintenance

If your tank is clean no rust, Maybe once a year or so. Just shut gas off, unscrew bottom, should be a lead washer, drop down and clean out, a little brush ,unless no rust etc comes out should be good to go unless you want to completely remove form vehicle. remove gas line and nut holding to fire wall, and reverse order to put back together. Good Luck.
__________________
www.whidbeymodelaclub.com
Gary WA is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 07-05-2011, 04:51 PM   #3
sethkestenbaum
Senior Member
 
sethkestenbaum's Avatar
 
Join Date: Jun 2011
Location: Westchester County, NY
Posts: 632
Default Re: Cast Iron Sediment Bowl Maintenance

Do you need to replace the lead washer?
sethkestenbaum is offline   Reply With Quote
Old 07-05-2011, 04:53 PM   #4
peters180a/170b
Senior Member
 
peters180a/170b's Avatar
 
Join Date: May 2010
Location: Putnam Valley N.Y.
Posts: 2,151
Default Re: Cast Iron Sediment Bowl Maintenance

if your not showing your car go with the repro. glass bowl.
peters180a/170b is offline   Reply With Quote
Old 07-05-2011, 06:52 PM   #5
Gary WA
Senior Member
 
Gary WA's Avatar
 
Join Date: May 2010
Location: Clinton,WA/Whidbey Island
Posts: 4,457
Default Re: Cast Iron Sediment Bowl Maintenance

Quote:
Originally Posted by sethkestenbaum View Post
Do you need to replace the lead washer?
If it isn't flattened out should be ok. You should be able to tell!
__________________
www.whidbeymodelaclub.com
Gary WA is offline   Reply With Quote
Old 07-05-2011, 09:32 PM   #6
gunmetal blue
Senior Member
 
gunmetal blue's Avatar
 
Join Date: Sep 2010
Location: Milford, Indiana
Posts: 366
Send a message via Yahoo to gunmetal blue
Default Re: Cast Iron Sediment Bowl Maintenance

Sponsored Links (Register now to hide all advertisements)
The cast iron work fine, most part place have a rebuild kit for them. It has a screen filter inside that you clean the junk out of and put back together



This is a pics of mine waiting on my lead washer. This can be painted black or left bare iron. And when you turn the valve on the sedument bowl make sure you have something under it to get the gas that comes out.
Attached Images
File Type: jpg 100_2489.jpg (70.8 KB, 90 views)

Last edited by gunmetal blue; 07-05-2011 at 09:45 PM.
gunmetal blue is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:19 AM.