|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Oct 2024
Posts: 19
|
![]()
Good morning, friends,
1941 Ford Super Deluxe Fordor I have a gap in the trunk lid/deck on the upper left corner and it appears to be caused by a hinge that doesn't match the other, both by visual inspection and measurements. What should I do? Modify the hinge? Buy new hinges? Thanks! |
![]() |
![]() |
![]() |
#2 |
Senior Member
Join Date: May 2010
Location: Basking Ridge, NJ
Posts: 686
|
![]()
Bondo, Only Kidding
Back the car into a hard object, Only Kidding Wear Sun Glasses, Only Kidding, Put an ESSO Tony the Tiger Tail there, Only Kidding Seriously, take both hinges off the car, identify the differences, modify accordingly (nothing to loose), go slow, small adjustments seem to have big effect. Also look at how - where the hinges are attached, any differences? If modification/adjustment doesn't work, look for a replacement hinge. Back in December I installed a NOS deck lid in my coupe, perfect (tight) gaps. Opened it last week, rubbing in two spots (paint loss), 40 degree temp change to blame. Good luck, |
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 | |
Senior Member
Join Date: May 2015
Posts: 10,145
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#4 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,374
|
![]()
It looks like the hinge on the right has a tear in the metal . It could be your gap .
Ive got a few tudors I’ll take photos of . I have a 46 that has very similar hinges , I’m not sure they interchange but if they dont that could be your gap . I’ll take photos of the 46 also . |
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,374
|
![]()
I just took some quick pics . I sent you a pm . Look up top right under your name if you didnt already know where to look .
Im not to tech savy so emails are the only way I can send pics. Gray |
![]() |
![]() |
![]() |
#6 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,374
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Senior Member
Join Date: May 2010
Location: middle of Iowa
Posts: 890
|
![]()
Yeah, it looks like cracks in both hinges. I think spacers between the body and the hinge should make the lid sit closer to the body. Basically spacing the pivot point closer to the center of the car.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Jul 2016
Location: Lake worth Florida
Posts: 1,374
|
![]()
All 4 of mine 3 41s and a 46 have a spacer .
|
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|