32 glass check dimensions.

[Mart]

Hello. Does anyone have access to 32 2 door sedan glass? I could do with checking the height of the side glass, front and rear. I have made some templates and each one is about 15" at the highest part. Is this right? Can anybody check?

Alternatively, can anyone tell me the dimension from the lower window opening down to the top of the glass support channel, when wound fully up. That might be easier as it can be done on an assembled car.

Hope someone can help.

Mart.

[BoxCar Tom]

Mart,

From the top of the support channel to the top of the glass
Front Driver 14 1/16" Pass 14 1/16"
Rear Driver 14 5/16" Pass 14 1/4"

[BoxCar Tom]

Mart,

US version tudor sedan

From the top of the support channel to the top of the glass
Front Driver 14 1/16" Pass 14 1/16"
Rear Driver 14 5/16" Pass 14 1/4"

Tom

[Mart]

Thanks Tom.

When the windows are wound up, is the lower channel almost level with the bottom of the window opening?

[BoxCar Tom]

Both front window channels are down about a 1/4 inch below the window opening. Sorry cant say that about the back windows. They are down, can't wind them all the way up. Something stops them at about one third up. The car is in a remote garage, I have to bring it home to work on it.

[Mart]

Sponsored Links (Register now to hide all advertisements)

Thanks very much, Tom. That info is all very helpful.

Mart.