The Ford Barn

Wick · 02-16-2025, 11:14 AM

Here's a couple pictures of the contraption.

Fullraceflathead · 02-16-2025, 11:39 AM

Looks like a neat idea!!!

katy · 02-16-2025, 11:47 AM

Thank's Wick,

There must be a hole in the bottom board that we can't see.

alexiskai · 02-16-2025, 12:37 PM

Quote:

Originally Posted by katy

There must be a hole in the bottom board that we can't see.

You can kinda see it in one of the photos.

Wick · 02-16-2025, 02:35 PM

Here you go.

Planojc · 02-17-2025, 09:40 AM

Sponsored Links (Register now to hide all advertisements)

I have used one like this and it works great.

Big hammer · 02-17-2025, 10:58 AM

Thanks for sharing Wick !!! Nifty looking tool !

katy · 02-17-2025, 12:40 PM

Thanks again Wick.

rotorwrench · 02-17-2025, 07:49 PM

It reminds me of some of the home made automatic transmission pressing tools I've seen.

Bigsnapper43 · 02-17-2025, 09:25 PM

Having rebuilt several towers using 3 different homemade spring compressor I bit the bullet and bought the kit. Safer, quicker, and faster, with a little use I wouldn't go back!!!

1931stdcoupe · 02-19-2025, 10:46 AM

Kit? What kit?

Y-Blockhead · 02-19-2025, 11:41 AM

Nice Wick! Looks to be a lot safer than the one some of the vendors sell.

02-16-2025, 11:39 AM	#2
Fullraceflathead Senior Member Join Date: May 2012 Location: Chillicothe, Missouri Posts: 1,684	Re: Wood tower spring press Looks like a neat idea!!! __________________ "If I asked people what they wanted they would have said faster horses." -Henry Ford "Primitive technology is not a design flaw" 1928 Ford Model A Roadster Pickup 1930 Gordon Smith Air Compressor 1941 Willy's Pickup 1960 Thunderbird-For Sale 1964 Buick Riviera 2x4 425 1965 Pontiac GTO, 455 Super Duty 2004 Dodge Ram SRT-10, V-10 Viper 1977 Charger Jet Boat,460 Ford,Jacuzzi Jet Front Engine Nostalgia Dragster,Supercharged 296 "Fullrace Flathead" Ford Engine Build up on DVD ask

02-16-2025, 11:47 AM	#3
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,716	Re: Wood tower spring press Thank's Wick, There must be a hole in the bottom board that we can't see. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

02-17-2025, 09:40 AM	#6
Planojc Senior Member Join Date: May 2010 Location: Plano, Texas Posts: 1,062	Re: Wood tower spring press Sponsored Links (Register now to hide all advertisements) I have used one like this and it works great.

02-17-2025, 10:58 AM	#7
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,432	Re: Wood tower spring press Thanks for sharing Wick !!! Nifty looking tool ! __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done

02-17-2025, 12:40 PM	#8
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,716	Re: Wood tower spring press Thanks again Wick. __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!

02-17-2025, 07:49 PM	#9
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 17,411	Re: Wood tower spring press It reminds me of some of the home made automatic transmission pressing tools I've seen.

02-17-2025, 09:25 PM	#10
Bigsnapper43 Senior Member Join Date: Feb 2023 Posts: 158	Re: Wood tower spring press Having rebuilt several towers using 3 different homemade spring compressor I bit the bullet and bought the kit. Safer, quicker, and faster, with a little use I wouldn't go back!!!

02-19-2025, 10:46 AM	#11
1931stdcoupe Junior Member Join Date: Jul 2023 Posts: 29	Re: Wood tower spring press Kit? What kit?

02-19-2025, 11:41 AM	#12
Y-Blockhead Senior Member Join Date: Jul 2011 Location: Redondo Beach, CA Posts: 6,652	Re: Wood tower spring press Nice Wick! Looks to be a lot safer than the one some of the vendors sell.