The Ford Barn

Ron Pilger · 01-03-2025, 10:08 AM

I have an ISO rod bearings ad on both Fordbarn and Early Ford V8 Club but silence is the only thing I'm hearing on this topic. Even the scammers are laying low which is especially concerning. Can anyone recommend unlikely or other potential individual or corporate sources that will allow me to get vintage-Ford mobile, again? Thx! Feel free to PM me.

KiWinUS · 01-03-2025, 10:52 AM

I believe Ron is looking for -.020 rod bearings.
I will check my inventory but should not be too difficult to find.

kurt v · 01-03-2025, 11:07 AM

what about Fred -southside obsolete for the bearings ?

Mac VP · 01-03-2025, 11:45 AM

Sponsored Links (Register now to hide all advertisements)

I knew I’d seen your inquiry recently but couldn’t find it to reply. I checked our stock on the early flanged rod bearings. We have just one set left in the .020” undersize and 2 or three sets in .030”. These are nice NOS Ford on the 20’s and I think a mix of Ford and USA aftermarket on the 30’s. These are still listed on our regular website but not in our online store. Call us next week (when we reopen from the holidays) if you want to order a set.

01-03-2025, 10:08 AM	#1
Ron Pilger Senior Member Join Date: May 2010 Location: Camrose, Alberta Posts: 401	LB bearings I have an ISO rod bearings ad on both Fordbarn and Early Ford V8 Club but silence is the only thing I'm hearing on this topic. Even the scammers are laying low which is especially concerning. Can anyone recommend unlikely or other potential individual or corporate sources that will allow me to get vintage-Ford mobile, again? Thx! Feel free to PM me.

01-03-2025, 10:52 AM	#2
KiWinUS Senior Member Join Date: May 2010 Location: Charlotte NC KiWi-L100 available here Posts: 3,264	Re: LB bearings I believe Ron is looking for -.020 rod bearings. I will check my inventory but should not be too difficult to find.

01-03-2025, 11:07 AM	#3
kurt v Senior Member Join Date: Sep 2021 Location: summerton, sc Posts: 486	Re: LB bearings what about Fred -southside obsolete for the bearings ?

01-03-2025, 11:45 AM	#4
Mac VP Senior Member Join Date: May 2010 Location: Cincinnati, OH Posts: 1,430	Re: LB bearings Sponsored Links (Register now to hide all advertisements) I knew I’d seen your inquiry recently but couldn’t find it to reply. I checked our stock on the early flanged rod bearings. We have just one set left in the .020” undersize and 2 or three sets in .030”. These are nice NOS Ford on the 20’s and I think a mix of Ford and USA aftermarket on the 30’s. These are still listed on our regular website but not in our online store. Call us next week (when we reopen from the holidays) if you want to order a set. __________________ VANPELT SALES LLC Cincinnati, Ohio Office: 513-724-9486 www.vanpeltsales.com www.classictransmission.com