Where do these go ???

[ford35lh]

I was looking for a small screw that rolled under the bench.
Started scraping with a stick and found lots of stuff.

These two items must have been under there for ever as
I don't recognize them. They appear to be some sort of
clamp or hold down. Can anyone ID them ???
thanks

[petehoovie]

Originally Posted by ford35lh

I was looking for a small screw that rolled under the bench.
Started scraping with a stick and found lots of stuff.

These two items must have been under there for ever as
I don't recognize them. They appear to be some sort of
clamp or hold down. Can anyone ID them ???
thanks

[Tim Ayers]

Distributor clamp for 8BA-style motors.

[tubman]

Hey! I think one of those must be mine. I lost one and had to pay $15 for one on eBay.

[rockfla]

Looks pretty dang close to one from a 289, 302, 351W or 351C. as well!!

[ford35lh]

Sponsored Links (Register now to hide all advertisements)

Thanks guys !

Never had any Ford motors but flatheads in the shop.
I won't mention a couple of un-named ones.

[paul2748]

And Y blocks too.

Originally Posted by rockfla

Looks pretty dang close to one from a 289, 302, 351W or 351C. as well!!

[19Fordy]

The one on the left is distributor hold down clamp for 1949-53 flathead Ford/ Merc. V-8.

Not sure about the clamp on the right.