The Ford Barn

Gwguidi · 01-14-2023, 07:57 AM

Hi,

I’m going to put a t5 in my speedster. Does anyone have a drawing of the AA transmission bolt pattern? I will mill out the adaptor myself. If anyone had it in cad that would be even better.

Thanks in advance,

Gary

rotorwrench · 01-14-2023, 11:08 AM

You will likely need an AA clutch housing so I'd start by getting one of those and use it for any measurements that may be needed. Vintage Metal Works sell an adapter that includes the pedal support for T5 conversion.
http://vintagemetalworks.blogspot.co...-adapters.html

Gwguidi · 01-14-2023, 04:26 PM

I am planning on getting a as bell housing. I’m looking for transmission bolt pattering drawing so I can make the adapter. What fun would it be to buy one. ��

rotorwrench · 01-14-2023, 09:26 PM

Sponsored Links (Register now to hide all advertisements)

The real fun is connecting the T5 to a torque tube. The car clutch housing is longer, if that's what you are referring to. The truck housing is shorter but needs the pedal mount post. It's a bit easier if you're using a model A drive system. It's always a trade off.

If you're using someone elses CAD file then what's the fun in that? If I can purchase it cheaper than I can make it then that's the way I go. Time is more valuable the older you get. I use the mill when nothing else is available for a good price.

01-14-2023, 07:57 AM	#1
Gwguidi Junior Member Join Date: Oct 2022 Posts: 2	Model A AA transmission bolt pattern Hi, I’m going to put a t5 in my speedster. Does anyone have a drawing of the AA transmission bolt pattern? I will mill out the adaptor myself. If anyone had it in cad that would be even better. Thanks in advance, Gary

01-14-2023, 11:08 AM	#2
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,484	Re: Model A AA transmission bolt pattern You will likely need an AA clutch housing so I'd start by getting one of those and use it for any measurements that may be needed. Vintage Metal Works sell an adapter that includes the pedal support for T5 conversion. http://vintagemetalworks.blogspot.co...-adapters.html

01-14-2023, 04:26 PM	#3
Gwguidi Junior Member Join Date: Oct 2022 Posts: 2	Re: Model A AA transmission bolt pattern I am planning on getting a as bell housing. I’m looking for transmission bolt pattering drawing so I can make the adapter. What fun would it be to buy one. ��

01-14-2023, 09:26 PM	#4
rotorwrench Senior Member Join Date: Jun 2010 Location: San Antonio, Texas Posts: 16,484	Re: Model A AA transmission bolt pattern Sponsored Links (Register now to hide all advertisements) The real fun is connecting the T5 to a torque tube. The car clutch housing is longer, if that's what you are referring to. The truck housing is shorter but needs the pedal mount post. It's a bit easier if you're using a model A drive system. It's always a trade off. If you're using someone elses CAD file then what's the fun in that? If I can purchase it cheaper than I can make it then that's the way I go. Time is more valuable the older you get. I use the mill when nothing else is available for a good price. Last edited by rotorwrench; 01-14-2023 at 09:32 PM.