01-23-2023, 02:26 PM
|
#1 |
|
Member
Join Date: Mar 2022
Posts: 47
|
hinge sleave
Have 1935 pickup. Has worn hinges looking for sleaves to use original size pins. I know they have oversize,but want to use hinge pickup mirrors.If i use oversize will have to drill mirrors,Drake said not good idea to drill those cast mirrors will crack. Looked on line but no luck.
|
|
|
|
01-23-2023, 02:52 PM
|
#2 |
|
Senior Member
Join Date: Feb 2011
Posts: 2,216
|
Re: hinge sleave
McMaster Carr has the steel sleeve in 12” pieces.
They also have reamers. I will look for my invoice and add p/n if I find it. Not all after market “stock sized” hinge pins are the same diameter.......
__________________
Tim Downtown, Ca Last edited by CA Victoria; 01-23-2023 at 03:03 PM. |
|
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
|
01-23-2023, 09:03 PM
|
#3 |
|
Senior Member
Join Date: May 2010
Location: Alabama
Posts: 3,395
|
Re: hinge sleave
I went to the hobby shop and bought brass tubing to fit the pin then drilled the hinge to the outside diameter of the brass tube. That was 30 years ago, still works great.
|
|
|
|
|
01-23-2023, 09:09 PM
|
#4 |
|
Senior Member
Join Date: May 2010
Posts: 2,912
|
Re: hinge sleave
Ford also notched the body hinge for oil and groved the pins for lubrication all later. Newc
|
|
|
|
|
01-23-2023, 09:12 PM
|
#5 | |
|
Senior Member
Join Date: May 2010
Location: Above the gnat line in Georgia
Posts: 7,082
|
Re: hinge sleave
Sponsored Links (Register now to hide all advertisements)
Quote:
__________________
Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm". |
|
|
|
|
 |
«
Previous Thread
|
Next Thread
»
Linear Mode
|
|
| Sponsored Links (Register now to hide all advertisements) |
|
|
All times are GMT -5. The time now is 09:12 AM.