34 5 window is finally running. Yippee!!!

[TerryS]

So after a summer of searching for someone to set up my distributor in Southern NH I was guided to a gentleman recently retired who had the machine and the know how,Thanks Tommy C....and Dad thanks you too. Took it for a few mile test ride so far so good.

Couple questions, I would like to know the correct plugs to buy and where to get them. I have champions in it, 48-12405-A2
Found the original boxes in the shop imagine that with 1 plug still wrapped in the wax paper. Can these still be found or do I need to get a cross referenced newer model?

Second question, Sterling wheel play. Going down the road there is about 10 inches of free play in the wheel. Is there a way to adjust this out?

Thanks for all your various posts to determine what was needed to get her running.

Terry from So. NH.