The Ford Barn

Rochesterguy · 05-10-2025, 11:24 AM

Looking for someone out there with parts for RHD cars. Thanks Carl

Keith True · 05-10-2025, 12:54 PM

Anything in particular you are looking for? I know I sold a steering box,and I may still have a bellhousing and pedals.I would have to look.I know I have a throttle pedal setup.It clamps to the steering column,and I was going to use it to operate a horn or whistle.I'm in Epping,20 miles straight down 125,south of Rochester.

Synchro909 · 05-10-2025, 05:40 PM

In addition to what Keith said, there differences in the brake cross shaft, the bell housing, pedals, inlet manifold, pitman arm. steering arms on the front hubs, wiring loom, tail light bracket etc and the rear vision mirror and wiper are mounted in a different position. Then there is the fuel tank
I have some of those bits but freight and tariffs would kill any deal.

Rochesterguy · 05-10-2025, 08:14 PM

Need an intake manifold

Synchro909 · 05-10-2025, 10:09 PM

Sponsored Links (Register now to hide all advertisements)

You'll also need the bell crank that goes on the manifold and rods the right length for the distributor (not available). Then there is the mechanism that bolts to the back of the block a bit like your throttle fitting to get from the starter button to the starter itself.

05-10-2025, 11:24 AM	#1
Rochesterguy Senior Member Join Date: May 2019 Location: Rochester NH Posts: 287	RHD parts Looking for someone out there with parts for RHD cars. Thanks Carl

05-10-2025, 12:54 PM	#2
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 3,423	Re: RHD parts Anything in particular you are looking for? I know I sold a steering box,and I may still have a bellhousing and pedals.I would have to look.I know I have a throttle pedal setup.It clamps to the steering column,and I was going to use it to operate a horn or whistle.I'm in Epping,20 miles straight down 125,south of Rochester.

05-10-2025, 05:40 PM	#3
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 8,044	Re: RHD parts In addition to what Keith said, there differences in the brake cross shaft, the bell housing, pedals, inlet manifold, pitman arm. steering arms on the front hubs, wiring loom, tail light bracket etc and the rear vision mirror and wiper are mounted in a different position. Then there is the fuel tank I have some of those bits but freight and tariffs would kill any deal. __________________ I sometimes wonder what happened to the people who asked me for directions. Even at my age, I still like to look at a young, attractive woman but I can't really remember why.

05-10-2025, 08:14 PM	#4
Rochesterguy Senior Member Join Date: May 2019 Location: Rochester NH Posts: 287	Re: RHD parts Need an intake manifold

05-10-2025, 10:09 PM	#5
Synchro909 Senior Member Join Date: Jun 2014 Location: Melbourne, Australia Posts: 8,044	Re: RHD parts Sponsored Links (Register now to hide all advertisements) You'll also need the bell crank that goes on the manifold and rods the right length for the distributor (not available). Then there is the mechanism that bolts to the back of the block a bit like your throttle fitting to get from the starter button to the starter itself. __________________ I sometimes wonder what happened to the people who asked me for directions. Even at my age, I still like to look at a young, attractive woman but I can't really remember why.