The Ford Barn

CA Victoria · 04-27-2022, 08:22 PM

A friend brought this by with hopes of identifying what it fits.
I am not familiar with the six cylinders so I am reaching out to our Ford Barn community for help.
It bears the Edmunds script logo and the only other marking is a raised cross on the bottom.

mercman from oz · 04-27-2022, 08:27 PM

CA Victoria is asking help to identify this Manifold?

CA Victoria · 04-27-2022, 11:45 PM

Sponsored Links (Register now to hide all advertisements)

Thank you Mercman.

Searching Edmunds there isn’t much historical info. I did learn that he made speed equipment for the average joe up to the 50s in Los Angeles.
This one may be for the early Chevy 216-6 cyl. I found some photos of similar intakes but they used single barrel carbs.
There are a variety of Edmunds logos but no indication to a relationship of year of production.

04-27-2022, 08:27 PM	#2
mercman from oz Senior Member Join Date: May 2012 Location: Queensland, Australia Posts: 12,016	Re: Help with identifying this manifold CA Victoria is asking help to identify this Manifold?

04-27-2022, 11:45 PM	#3
CA Victoria Senior Member Join Date: Feb 2011 Posts: 2,220	Re: Help with identifying this manifold Sponsored Links (Register now to hide all advertisements) Thank you Mercman. Searching Edmunds there isn’t much historical info. I did learn that he made speed equipment for the average joe up to the 50s in Los Angeles. This one may be for the early Chevy 216-6 cyl. I found some photos of similar intakes but they used single barrel carbs. There are a variety of Edmunds logos but no indication to a relationship of year of production. __________________ Tim Downtown, Ca Last edited by CA Victoria; 04-27-2022 at 11:52 PM.